User manual THEBEN RAMSES 721

[. . . ] Use: The clock thermostat is suitable for temperature control of domestic and business rooms, but not for rooms with major dirt generation (assembly units). [. . . ] Ensure that when installing and dismantling the clock thermostat that the voltage in the connecting lead is switched off. With a screwdriver turn the seal 3 to position 3. lift the grey plinth from the control section 4. Pull the connecting wires through the plinth Controller of room temperature may not be mounted on conductive ground. 5M above the floor, if possible on an internal wall, against which air can circulate without hindrance 6. Turn the seal 3 into position with a screwdriver Note: Keep the ventilation apertures 5 in the plinth free, no paint, wallpaper or other such material. Regelung über das Motor - Mischventil The connecting leads must conform to national regulations Commande de vannes méangeuses motorisées Besturing van gemotoriseerde mengkranen Comando valvola di miscelazione motorizzata If more than 3 leads are run, another external conductor is also permitted for the mains voltage of the product. A cold cement wall, the measured temperature deviation can be corrected with the pentiometer 6. [. . . ] You can also contact us for more information on the environmental performances of our products. [. . . ]