User manual THETFORD TECMA EASYFIT INSTALLATION GUIDE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual THETFORD TECMA EASYFIT. We hope that this THETFORD TECMA EASYFIT user guide will be useful to you.
Lastmanuals help download the user guide THETFORD TECMA EASYFIT.
Manual abstract: user guide THETFORD TECMA EASYFITINSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] If you have any questions or need assistance, please contact TecmaServiceat1-800-543-1219. These HOSE CLAMPS must be INSPECTED FREQUENTLY TOENSURETIGHTNESS, therebypreventingleaks. [. . . ] Note: Use only marine-quality reinforced hoses during EasyFit installation. Make sure hoses are not kinked and wiring is nottrappedbetweenthechinaandthewallor floor. Smooth the excess silicon bead around the perimeter of toilet, adding more silicon around the perimeter if neededtocreateauniformseal. When thoroughly clean and dry, firmly press the sensor in place. (Note: Wires can point in any direction the sensors directional orientationdoesnotaffectitsoperation. The Full Tank Sensor is mounted at the highest point on the tank for the tank's capacity, or where the installer wants the Tank Full indication to be. The Tank Sensors should be mounted near the centerline of the tank. The area for adhesion should be thoroughly cleaned with alcohol or equivalent, and dried, prior to mounting the sensor Les endroits où les capteurs adhèrent au réservoir doivent être entièrement nettoyés avec de l'alcool ou son équivalent et séchés avant l'installation des capteurs. Apply dielectric grease to wire terminals before terminals are installed in housings. Keep out of reach of children Do not wire pump directly to a power source so that it is controlled by its pressure-activated switch. [. . . ] Two wiresRed and Black, from the Control Box harness for power, with a male terminal connector on the toilet harness end. Must be 16 gauge, not provided with toilet, connector information is available in this manual. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THETFORD TECMA EASYFIT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual THETFORD TECMA EASYFIT will begin.
