User manual THOMSON 14MS73F

[. . . ] Instructions f o r u s e Instructions f o r u s e Instructions f o r u s e Instructions f o r u s e Instructions f o r u s e 1 4 M S 7 3 F MAINS CONNECTION AND REMOTE BATTERIES MAINS CONNECTION The TV is suitable for use on a. c. NOTE : The mains lead of the TV is fitted with a moulded plug. If the mains sockets are not compatible or if for any reason the plug is removed please follow these directions : The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock. [. . . ] S TA N D - B Y ( S L E E P T I M E R ) Press briefly. The menu shown on the right is displayed. ----:---- ----:---- On Off Program. : 01 -- + The line is selected. STOP Stand-By times of between 15 minutes and 4 hours can be set (in 15-minute steps). Press repeatedly to adjust the hours (max. VT Press repeatedly to adjust the minutes (from 0 to 45 minutes in 15-minute steps). TV TV Press briefly to clear the menu from the screen. The time left before Stand-By can be checked at any time: Press briefly. The time left is displayed for a few seconds. 00 : 13 The television will switch to Stand-By at the end of the timer interval. The Stand-By light flashes to indicate that the CHILD LOCK function has been activated. The set can only be switched on again using the remote control not by the keyboard. You can cancel a sleep timer command. Press briefly to display the menu. STOP Press repeatedly to go back to -- -- : -- --. TV ----:---- -- + Press briefly to clear the menu from the screen. - 12 - ALARM This cannot be used if the clock is not set. You can programme your television set to switch on automatically to a chosen programme at a chosen time. Firstly, make sure that the internal clock is set to the correct time. To do so : TV Press briefly. If the time display is -- -- : -- --, you cannot set the alarm. In this case, or if the time displayed is incorrect, you must first set the clock or the time reference programme. If the time displayed is correct, the alarm can be programmed. Press briefly. The menu shown on the right will appear. ----:---- Press briefly to select the STOP line. Press repeatedly to adjust the hours. FUNC. : 01 -- + Press repeatedly to adjust the minutes. Adjusting the alarm time automatically activates the alarm function : On is selected. On Off -- -- + + Select the Program. : 02 Choose the programme you want the set to switch on to. If you wish to cancel the alarm function, select the On line. STOP FUNC. VT On On Off Off -- -- + + Select Off to deactivate the alarm function. TV Press briefly to clear the menu from the screen. Switch the television to Stand-By. The Stand-By light flashes. The television will switch on to the selected channel at the time programmed. The symbol appears on the bottom right of the screen. [. . . ] Don't obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. Don't listen to headphones at high volume, as such use can permanently damage your hearing. Don't use makeshift stands and NEVER fix legs with wood screws­to ensure complete safety always fit the manufacturer's approved stand or legs, with the fixings provided, according to the instructions. [. . . ]