User manual THOMSON 20LB020S4

[. . . ] Contents Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sockets on the rear of the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Mains power and speaker sockets 30LB020S4. . . . . . . . . . . . . . . . . . . . [. . . ] The station identification abbreviations (Name) can still be modified later. If the picture is just black/white or there is no sound or interference is evident on some channels, the standard Standard and the Norm be adjusted accordingly in the Install. 17. Use arrow buttons Y / / to select the individual menu items. Use arrow buttons / ÿ to modify the relevant settings or data. Set the channel position to where the TV station is to be stored under Program. me Direct channel input is carried out in the Channel line. Use the button F1 to select between S for special channels and . . . The channel number (2-digit) can be entered easily using the numeric buttons (0-9); or the channel number can be scrolled through backwards of forwards one by one using the arrow buttons / ÿ; For station fine-tuning, select the Frequency line using the arrow keys Y / /. You can change the settings in 50 kHz intervals up or down by pressing arrow buttons / ÿ. The Standard and Norm lines should be adapted to the country-specific TV standard. The channel name appears automatically for channels with VPS/PDC. Use arrow buttons / ÿ to select the position where the subsequent character (letter, digit, etc. ) should be entered. Select the desired symbol using arrow buttons Y / /. Use arrow buttons / ÿ to select a new position, etc. 14 Operation 18. If the full channel name is set, quit the entry field using arrow buttons / ÿ. Select Tuner in the Source menu line for the aerial or cable system stations using the arrow buttons / ÿ. Press the OK button to store the settings. To allocate further channels select the channel line again and proceed in the same way. Press the MENU button twice, the Program list appears on the screen. Use arrow buttons Y / / to select the channel whose position needs to be changed. Select the channel using right-hand arrow button ÿ. Use arrow buttons Y / / to guide the bar containing the channel name to a new position. Use left-hand arrow button to store the new channel position in the list. [. . . ] AV 2 The AV signal is input via Scart socket F, e. g. for video recorders, analogue satellite receivers, DVD players, etc. AV 3 The AV signal is input via Scart socket D, e. g. for video recorders, analogue satellite receivers, DVD players, (only 23LB020S4, etc. 30LB020S4) 5. Tuner 6. [. . . ]