User manual THOMSON 20LCDM03B

[. . . ] IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. [. . . ] Setting up channels manually requires every setting for a particular channel to be entered, one at a time. @ MANUAL INSTALLATION Return Standard Frequency Programme name Fine-tuning Store on programme Decoder Teletext char. 150. 75MHz BBC2 ------|---------02 o 1. . . Display the OVERVIEW menu by pressing the MENU button. Select the Installation option and press OK to confirm. Select the relevant country and press OK. Select the Manual Installation option from the INSTALLATION menu and press OK to confirm. 1. Select the Standard option and then the relevant standard for your country using the / ÿ buttons. Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg, DK for Eastern Europe , the Middle East and Asia, EURO for Western Europe, Australia and New Zealand. Use the or ÿ button to start the search in ascending or descending order. When a channel is found pictures appear. Note : If the channel name is found, it is displayed next to Programme name option. If the picture is not clear you can adjust the setting. You do this by selecting the Fine tuning option and adjusting it with the / ÿ buttons. If the channel is encrypted and you want to connect a decoder, select the Decoder option and check the box by pressing the OK button. set option and choose the character set that will be used for Teletext on this channel using the / ÿ buttons. The following character sets are available: 1 :Western Europe 2 : Eastern Europe 3 : Russian and Bulgarian 4 : Greek 5 :Arabic 6 : Ukrainian 7 : Belarussian The character set selected determines how characters are displayed on Teletext screens. 6. Select the Store on programme option to assign a number to the channel. Enter the number using the numeric buttons. Important: as soon as you change a setting in the MANUAL INSTALLATION menu the channel number starts flashing under the Store on programme option . To confirm your change you must select the Store on programme option and press OK. If you do not confirm the change it will be cancelled when you change channel or put the television into standby mode. Repeat this procedure (2 to 6) to find other channels. Automatic update: Auto update allows you to set up channels just launched or any channels that are missing or wrongly set up. You can access the menu by selecting the Automatic update line in the INSTALLATION menu. Return: returns to the INSTALLATION menu. Standard: Select the relevant standard for your country using the / ÿ buttons. [. . . ] Check that the remote sensor window is not under strong fluorescent lighting. Make sure the antenna cable is properly connected. Consider whether TV signals are being properly received. Make sure the antenna cable is properly connected. [. . . ]