User manual THOMSON 21DG15CH

[. . . ] Even if the ON/OFF switch is in the OFF position, the set is not completely disconnected from the mains. To disconnect the set completely, pull out the mains plug. GB DO NOT OBSTRUCT VENTILATION OPE` NINGS. AVOID WATER, HEAT, DIRECT SUNLIGHT. Do not place audio loudspeakers next to your TV set as the magnets in the speakers may cause coloured patches on the screen. Remove the mains plug from the wall outlet in the following cases: 1. It is wise to disconnect the aerial plug too in this case. If you notice any odour or smoke coming from your set. [. . . ] Call up the channel you wish to watch using the numerical keypad on the remote control. In order to maintain the optimum sound and picture quality of your TV set, avoid connecting 2 devices to the SCART socket and the AUDIO/VIDEO sockets simultaneously. 3 Remote Control Display programme No. and sleep timer (Yellow Stand-by GB button) Display Timer Menu (Green button) Inactive Call upTeletext/Fastext (purCall up personal adjustments (Red button) ple key) Confirm an action or validate a menu option To leave a menu Adjustment: move to Right/Left in menus and select one of the proposed options To go to Picture and Channel Adjustment menus Move Up and Down in the menus Volume level To change programme Sound mute To switch to connected equipment (e. g. : video recorder) 8 Direct access to programmes and entering numerical values in menus The red, yellow, green and blue buttons are also used for teletext. Batteries: Remove the lid at the back of the remote control and insert two 1. 5 V, LR06 batteries. Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling. . " 4 Automatic Channel Setting This set is equipped with an automatic search system which will search for and store all channels available in your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Ensure that the aerial lead is connected to the TV set. Check that any equipment connected only via the aerial (video recorder or satellite equipment) is operating. Switch off any equipment connected via the SCART socket. Searching for stations depends on the broadcasting standard selected in the AUTO INSTALL menu. EURO (Western Europe, Tunisia, Morocco) Searches for PAL/SECAM BG channels For details concerning DKK' channels, see Manual Channel Setting. DK (Eastern Europe, Middle East, Africa, French Territories) Searches for SECAM DKK' then PAL/SECAM BG channels GB Installation Press the ON/OFF button, the indicator lamp lights up. If the television set remains on stand­by, press one of the buttons on the remote control numerical keypad. When the television set is turned on for the first time, the Installation menu appears automatically. If this is not the case, you can call it up by: ­ pressing the times. button on the remote control three AUTO INSTALL. EURO DKK' Select the required standard using the Press to confirm. buttons. A new menu appears. The cursor moves from left to right on the VL line, then on the VH line and then on the U line. The channels found are stored in memory in order starting from programme PR 01. AUTO INSTALL. EURO VL You can stop the automatic search at any time by pressing PR01 the button. The search stops automatically at the end of the U band or when 99 channels have been found. The Programme Organizer menu then appears automatically. The channel stored on programme PR 01 is selected (see next page). 5 Changing a Programme Number Select the channel number to be changed using the button. GB Using the numerical keypad on the remote control, enter the new programme number. You can also use the Press the buttons on the remote control. EURO VL PR01 AUTO INSTALL. button to confirm the change. The programmes stored under the old and new numbers are then swapped. [. . . ] 24) : Press and hold the decimal (tens) number (2): 2 then press the units (4) number briefly: 2 4 Volume Adjustment - Sound Mute Press the buttons to turn the sound up or down. Press the The sound returns if the button is pressed again. Zapping Press the buttons to scroll through the programmes stored in memory. Personal Adjustments Press the red button to call up your personal adjustments (See Picture Adjustments). Display Press the yellow button to display the programme number and stand­by time (if sleep timer command is activated). If the channel has been fine tuned, the This information disappears automatically after a few seconds. Press the yellow again to delete this information. [. . . ]