User manual THOMSON 32LB125

[. . . ] IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. [. . . ] Or if you press EXIT button, you will also stop the auto update fuction. 13 5. OPERATION General operation Switching the TV set on and off To switch the TV set on, press the button located on the right side of the set. When the set is on, the indicator on the front is green. Standby mode Press the button on the screen right side of TV or on the remote control. The TV set remains powered up, but with low energy consumption. When the TV set is in standby mode, the indicator on the front is red. Quitting standby mode - Press the or any numeric button on the remote control, - press the PR+/PR- buttons to switch on the television at the last channel or AV programme you were watching, - press the AV button to switch the television on at the last AV programme you were watching. Volume Volume control: use the VOL + / - buttons on the right side of the TV set or press the same buttons on the remote control to increase or decrease the volume. Press this button again or the VOL+ button to Displaying status information In TV mode, press the yellow button (INFO) on the remote control to display the number and name of the channel you are watching, the type of sound, the zoom or format type, sound mute status and the sleep timer status (if active). TV lock message is displayed if the function is activated under the PREFERENCES menu. When you switch on the television or change channels, the number and name of the channel are displayed if you entered its name under the ORGANISER menu. In PC and PIC(see page 21) modes, press the yellow button (INFO) on the remote control to display the Resolution , Vertical and Horizontal frequency. Accessing channels Using the numeric buttons: - for channels 1 to 9, press the corresponding button. - for channels 10 to 99, press the 0 button to display "--", then enter the two digits. Using the PR+/PR- buttons: scroll through the channels. AV programmes are not included in the cycle unless you use the buttons on the right side of the TV set. Accessing AV programmes Press the AV button to display the last selected audio-visual programmes and scan through the other audio-visual programmes. AV selections loop (27"): AV1/AV1 RGB, AV1 RGB, AV2/AV2-S, YCrCb/YPrPb, VGA, HDMI/DVI (Depending on model). AV selections loop (32"): AV1/AV1 RGB, AV1 RGB, AV2/AV2-S, AV3/AV3-S YCrCb/YPrPb, , VGA, HDMI/DVI (Depending on model). 14 Zoom In TV mode, you have the option of changing the display format and using the zoom function via the buttons. Here is selections of Zoom: 16/9 sets have the following formats and zoom functions available: 4/3 Format - picture in 4/3 format Zoom 14/9 - picture in 14/9 letterbox format Zoom 16/9 - picture in 16/9 letterbox format Zoom 16/9 up - picture in 16/9 letterbox format moved up for subtitles Cinerama - Cinerama 16/9 Format - picture in 16/9 format 4/3 sets have two formats available: 4/3 format and 16/9 format. Note : The Zoom type can't be change when menu appears on the screen. In Teletext mode, the screen alway 4/3 format but if exiting the Teletext mode, the screen will return the former Zoom level. When user changes the zoom format, the zoom status will appear temporarily at the bottom of the screen. /ÿ Panning function for Zoom In 14/9 Zoom, 16/9 Zoom, or 16/9 Zoom up, user can shift the picture up and down temporarily by using button and the panning icon will display. When the picture reach the upperest positon for the zoom level, the panning icon will show : When the picture reach the lowest positon for the zoom level, the panning icon will show : Last programme Press the RETURN button to return to last watched programme. Freeze Press OK button in TV mode to freeze the picture. Press again OK button to unfreeze the picture. 15 Adjusting the sound X SOUND Return Preset Balance Sound type Auto. [. . . ] Check whether you have selected "Mute" for Audio setting. Make sure the volume is not set to minimum. Make sure that headphones are not connected. A Mains cut could have switched the TV LCD panel in security mode. [. . . ]