User manual THOMSON ACC912

[. . . ] Accessories ACC912 6-Bolts for Wall mounting bracket 6-Wall Ancho Bolt Sleeves 6-Monitor Bracket Bolts 6-Washers Hole Drilling Template Installation and Setup Guide Specifications Wall mounting bracket Installation and Setup Guide Width(mm) Height(mm) Depth(mm) Weight(kg) 616 440 36 4. 7 Safety Instructions - Qualified service technician should install the product properly after reading this manual thoroughly. - Qualified service technician should hand this manual over to the customer after installation and ask him/her to read and keep it. - After reading this manual, keep it in the place that the user always can contact easily. WARNING Do not install this product by yourself. [. . . ] Lift the monitor brackets in the direction shown by arrow 2. Lift the monitor brackets off the mounting frame in the direction shown by arrow 3. 2 Bracket Hook - As shown above, carefully place the Monitor screen side down on a cushioned surface that will protect the monitor and screen from damage. Insert the monitor brackets on the monitor as shown above. Install the 6 bolts securely, in the back of the monitor in the holes provided. Be sure the bracket hooks are at the top side of the monitor. 4 Keep these instructions for future reference - Using the hole-drilling template provided, mark the positions of the anchor holes shown on the drawing in the wall; using a center-punch or other device to clearly identify the 6 drill hole positions. (See page 7) Note: It is advisable to use a bubble level to make sure that the template is horizontally true. - Warning: The surface that the wall mounting bracket is to be mounted on should be of sufficient strength to support the weight of the monitor and speakers typically; concrete, strong/weak natural rock, brick and hollow block. - Warning: Plasterboard is not a sufficiently strong enough material; unless the bolts are anchored into standard construction type studs capable of supporting the weight of the monitor and speakers. If you can not determine the strength of the material, each drilled hole should be capable of supporting normal stress 70N and shear stress 100N. 3 5 ENGLISH <How to fix anchors and bolts> a b c d Anchor e Washer Bolt for angle adjustment a. c. Drill the 6 hole positions as shown on page 7. [. . . ] Push the bottom of the monitor toward the wall as shown in arrow 2, so that the monitor will "click" into position onto the wall mounting bracket. Caution: Be sure to lift a monitor/speakers assembly by the monitor only, do not lift using only the speakers. 8 [. . . ]