User manual THOMSON BOT61MXD

[. . . ] It can be used for barbecues (to be placed directly on the grid). It is used for cooking pastries such as cream puffs, meringues, cup cakes, puff pastry, etc. inserted under the grid , it catches barbecue juices and grease. [. . . ] The time display flashes to indicate that you can now adjust the setting (fig. The cooking end time is automatically recorded after a few seconds. the cooking end time display stops flashing. After these 3 steps, the oven heating is de layed so that cooking ends at 13:00. At the end of cooking (end of programmed time), - the oven stops, - 0:00 is displayed, - A series of beeps is emitted for a few minutes. The beeps can be stopped by pressing the " " button. The display shows the time once again when the function selector switch is returned to 0 (fig. In the case of programmed cooking cycles, the cavity lights up until cooking begins, and remains lit until cooking is finished. - Your oven's programmer can be used as an independent timer that allows you to count down a time without operating the oven. - Press the " " button to confirm or wait a few seconds (fig. 2 The display stops flashing after a few seconds and the timer starts working, counting down the time in seconds. once the time has expired , the timer emits a series of beeps to notify you. The beeps can be stopped by pressing the " " button. Rapid temperature increase: Some dishes can be placed in the oven while it is still cold. [. . . ] In any event, check the following items: - The oven is not connected to the power supply. Replace the fuse in your electrical set-up and check its capacity (16A). - The oven is not connected Plug in your oven or change the or the fuse is not working. [. . . ]