User manual THOMSON CB 1000

[. . . ] CB1000 EN DVD / VIDEO CASSETTE RECORDER E9TF0ED_EN. book Page 2 Wednesday, March 17, 2010 1:32 PM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbol for CLASS II (Double Insulation) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] 1 In stop mode, press [SETUP]. Do you want to cancel?Yes No Connections 2 3 4 5 Select “DVD Menu” using [K \ L], then press [ENTER\OK]. Select “Disc Protect OFF A ON” using [K \ L], then press [ENTER\OK]. Select “Yes” using [K \ L], then press [ENTER\OK]. The disc is protected. Finalising 10% If “ ” appears when [STOP C] is pressed, you cannot cancel finalising because the finalising has already reached at a critical point in its process. If “No” is selected and [ENTER\OK] or [RETURN\BACK] is pressed, finalising is continued. You cannot cancel finalising a DVD-R disc once it has started. Basic Setup / TV View Operation Press [SETUP] to exit. Note • The Disc Protect setting is available only when a disc recorded in VR mode is inserted. • You can select only “Disc Protect ON A OFF” when a protected disc is inserted. To cancel the disc protect: • Select “Disc Protect ON A OFF” at step 3, then select “Yes”. • If you insert a disc protected with this unit, “Disc Protect ON A OFF” will appear instead of “OFF A ON”. 5 Finalising is complete. Note Recording Playback • Finalising a disc in video mode automatically creates a Title menu. • After you finalise DVD-RW/-R disc, you can edit or record only on a video mode disc. • To release the finalisation of the disc, select “Undo Finalise” at step 3. • If you insert a DVD-RW disc finalised with this unit, “Undo Finalise” will appear instead of “Finalise”. • DO NOT power off during finalising. This may result in a malfunction. Finalising Discs Video VR DVD-RW DVD-RW DVD-R You will need to finalise discs to play them back in other units. Finalising may take from several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalisation. Do not unplug the mains cable during finalisation. Auto Finalise Video DVD-RW DVD-R You can finalise discs automatically when the disc space runs out if you set this in “Setup” menu. Editing 1 2 3 4 Insert a recordable disc before finalising. 1 In stop mode, press [SETUP]. In stop mode, press [SETUP]. Select “General Setting” using [K \ L], then press [ENTER\OK]. Select “Recording” using [K \ L], then press [ENTER\OK]. 2 3 4 Select “DVD Menu” using [K \ L], then press [ENTER\OK]. Select “Finalise” using [K \ L], then press [ENTER\OK]. Select “Yes” using [K \ L], then press [ENTER\OK]. Finalise disc? [. . . ] • Disc may need formatting. Recording Error Cannot record. Recording Error This disc is protected and not recordable. (No area for new recording) • Insert a ver. (Compatible with CPRM. ) • Remove the disc protect setting in “DVD Menu” menu. [. . . ]