User manual THOMSON CB1160HDD

[. . . ] CB1160HDD EN HDD & DVD / VIDEO CASSETTE RECORDER E3TF0ED_EN. book Page 2 Wednesday, March 17, 2010 11:20 AM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbol for CLASS II (Double Insulation) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] It will start dubbing the title in the Playlist if the Playlist was the last selected list. 42 EN E3TF0ED_EN. book Page 43 Wednesday, March 17, 2010 11:20 AM One Touch Dubbing from VCR to DVD Selected Title Dubbing Video VR Introduction HDD DVD-RW DVD-RW DVD-R VCR If you want to record a title in the videotape, press [VCR] first. 1 2 In stop mode, press [SETUP]. Select “Dubbing” using [K \ L], then press [ENTER\OK]. Connections 1 2 3 Press [PLAY B] to start the playback of the videotape you want to dub. Press [STOP C] or [PAUSE F] where you want to start dubbing. Press [DUBBING VCR M DVD] on the front panel. The dubbing will start from there to the end. Setup General Setting Timer Programming Title List DVD Menu HDD Menu Dubbing Basic Setup / TV View Operation To stop the dubbing in progress: Press [STOP C] on the front panel. Press [STOP C] for 2 seconds on the remote control. Note • When dubbing starts, the video image may be distorted because of the Digital Tracking function. Play the videotape until the image clears up and then start the dubbing. • Dubbing takes as much time as the playback does. HDD to DVD / DVD to HDD / HDD to VCR / DVD to VCR 3 Select your desired dubbing direction using [K \ L], then press [ENTER\OK]. (Refer to “VCR to HDD / DVD” on page 44. ) e. g. ) HDD A DVD Dubbing HDD DVD HDD VCR DVD VCR DVD HDD VCR HDD VCR DVD Recording One-Title Dubbing between HDD and DVD Video VR Playback DVD-RW DVD-RW DVD-R This function lets you select one specific title from the title list for dubbing. HDD If you want to dub a title in the HDD, press [HDD] first. If you want to dub a title in a disc, press [DVD] first. 4 Select “Add” using [K \ L], then press [ENTER\OK]. HDD DVD Editing 1 2 3 Press [TOP MENU]. Select a desired title to be dubbed using [K \ L \ 0 \ 1], then press [ENTER\OK]. Select “Dubbing” using [K \ L], then press [ENTER\OK]. e. g. ) HDD Original Resume Playback Play From Start Edit Title Delete Add to Playlist Delete Multiple Titles Dubbing 3000 MB Dubbing List Add Delete All Dubbing Start Function Setup 1/1 VCR Functions • If you have registered any dubbing before, they will be listed in the dubbing title list. 4 Select “Yes” using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No 5 Select a desired title using [K \ L \ 0 \ 1], then press [ENTER\OK]. The title is now registered in the dubbing list. To cancel selected title: Select a title using [K \ L \ 0 \ 1], then press [ENTER\OK] again. Dubbing of the selected title will start. To stop the dubbing in progress: Press [STOP C] on the front panel. Press [STOP C] for 2 seconds on the remote control. Others EN 43 E3TF0ED_EN. book Page 44 Wednesday, March 17, 2010 11:20 AM 6 Repeat step 5 until you register all the titles to be dubbed, then press [DUBBING]. e. g. ) HDD ORG Title List 22 SP Confirmation message will appear. • Depending on the dubbing direction, the available recording speed varies. • When dubbing from HDD to DVD, you can select “High” to perform the high speed dubbing (refer to “Recording Speed for Dubbing” on page 41 for more details). 17/ 05/ 10 07:00 22 SP 07:00 (00:30:00) 17/05/10 9 3 2 1 1 2 Select “Yes” using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No 4 New 5 1 6 If dubbing continues when timer recording starts, the next display will appear. Press ‘DUBBING’ to confirm. 1/6 To delete a title: 1) Go to the dubbing list, then select a title using [K \ L]. 2) Select “Delete” using [K \ L], then press [ENTER\OK]. 3) Select “Yes” using [K \ L], then press [ENTER\OK]. Timer Recording is in standby. • It may take awhile to prepare for the dubbing. To stop the dubbing in progress: Press [STOP C] on the front panel. [. . . ] • You are trying to record onto the DVD-RW / -R disc on which the number of recorded titles has reached the maximum (99). • You are trying to record onto the VR mode DVD-RW disc on which the number of recorded chapters has reached the maximum (999). • This disc has no space to write Control Information when recording or deleting contents. • When editing has been repeatedly performed, the control information area may become full even though the recording area has enough space. Solution • Insert a recordable disc with enough recording space. [. . . ]