User manual THOMSON CS600

[. . . ] CS600 EN 5/17/05 3:14 PM Page 2 user manual ON / ECO CARD MEMORY TUNE/PR ESET BAND/CD INFO THOMSON 46, quai Alphonse Le Gallo 92648 Boulogne Cedex FRANCE www. thomson. net 5605618A CS600 It is important to read this instruction book prior to using your new product for the first time. CS600 EN 5/3/05 4:17 PM Page 4 Safety Information EN Safety Information CAUTION! Invisible laser radiation when open. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit. This unit comply with the existing requirements In accordance with the rating plate of the unit, this unit complies with current standards concerning electrical safety and electromagnetic compatibility. [. . . ] The SLEEP icon lights on the display when sleep mode is activated. Adjust Sleep Time Press SLEEP again when the remaining sleep time is displayed to change sleep time. EN Setting the Clock 1. Press and hold CLOCK on the remote control until the hour flashes on the display. Press SKIP BACKWARD or SKIP FORWARD to set the hour and then press CLOCK to shift to minute digits. Press SKIP BACKWARD or SKIP FORWARD to set the minute. Press CLOCK to save settings and STOP to quit setting. Note: Sleep is automatically de-activated when the unit is turned off. View Remaining Sleep Time 5. Press SKIP BACKWARD or SKIP FORWARD to select TUNER / TUNER REC / DISC / UDISC (USB) / CARD. Timer Source Tuner If TUNER REC is selected, press SKIP BACKWARD or SKIP FORWARD to select the preset station. Adjust VOLUME CONTROL to select desired volume level. The timer is automatically activated once timer setting is saved. When sleep is activated, press SLEEP once to view remaining sleep time. Note: When system is ON, you can press CLOCK to display the current time for about 2 seconds. Sound Features Volume Control Rotate the volume control on the main unit or press VOL or on the remote control to adjust volume level. The volume level shows briefly on the display. Using Preset Equalizer Curves Press EQ to toggle among FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM. The display shows your selection briefly and the relative icon lights on the display. Setting the Timer 1. Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display. Timer On 00:00A Creating a Custom Curve Bass Boost Press B. BOOST to turn on/off boosting the bass frequency. The BASS BOOST icon lights on the display when it is activated. Muting Audio 2. For setting time, press SKIP BACKWARD or SKIP FORWARD to set the hour and then press TIMER to shift to minute digits. Press MUTE on the remote to cut the sound (Remote Only). While CUSTOM is displayed, press SKIP BACKWARD or SKIP FORWARD to cycle among displayed bass and treble range levels. While BAS and TRE is displayed, adjust volume control to set the associated gain between -10 - +10. BAS +2 TRE 00 Custom Activating the Timer Press and release TIMER to turn on/off the alarm. The timer icon is displayed when timer is activated. 9 10 CS600 EN 5/3/05 4:17 PM Page 18 Navigation Controls EN CD Player Important CD and mp3/WMA Information BAND FM ST File Navigation Main Unit Remote Control VOL REPEAT EN Notes on mp3/WMA Disc: · Use . mp3 as the extension when converting audio files into mp3 for saving onto CD-R(W) or CD-ROM, e. g. · Do not use the . mp3 extension for other text or non-audio data files as this may result in serious malfunction and harmful noise interference. [. . . ] Press DELETE on the main unit or DEL on the remote control. Rotate the Volume button on the main unit or press UP or DOWN on the remote control to select Yes to delete or No to cancel. No > Yes Note: The encoding bitrate for tuner, CD and AUX signal are as below: CD / Aux : 128 kbps Tuner : 96 kbps Poor radio reception 4. Press SELECT on the main unit or RIGHT / ENTER on the remote control to confirm selection. [. . . ]