User manual THOMSON CS606

[. . . ] CS606_EN 6/12/06 2:08 PM Page 2 user manual THOMSON 46, quai Alphonse Le Gallo 92648 Boulogne Cedex FRANCE www. thomson. net It is important to read this instruction book prior to using your new product for the first time 5626 0970 CS606 CS606_EN 6/12/06 2:08 PM Page 4 Safety Information EN Safety Information CAUTION! Invisible laser radiation when open. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit. This unit comply with the existing requirements In accordance with the rating plate of the unit, this unit complies with current standards concerning electrical safety and electromagnetic compatibility. [. . . ] Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display. Timer On 00:00A Sleep Timer You can select the time interval in minutes before the unit turns off automatically. Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes. The SLEEP icon lights on the display when sleep timer is activated. View Remaining Sleep Time When sleep is activated, press SLEEP once to view remaining sleep time. EN Adjust Sleep Time Press SLEEP again when the remaining sleep time is displayed to change sleep time. Note: Sleep is automatically de-activated when the unit is turned off. 7. The timer is automatically activated once timer setting is saved 2. For setting time, press or to set the hour and then press TIMER to shift to minute digits. Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting. Timer On 00:00A Off 00:00P Tips: "TUNER REC" settings are for Program Recording. For more information, see paragraph below. Activating the Timer Press and release TIMER to turn on/off the alarm. The timer icon is displayed when timer is activated. Sound Features Volume Control Rotate the volume control on the main unit or press VOL or on the remote control to adjust volume level. The volume level shows briefly on the display. Program Recording 5. Press or to select TUNER / TUNER REC / DISC / USB. Use Program Recording to preset the unit to record your favorite radio program. Choose TUNER REC as the source to record radio at the preset time. Make sure the mp3 player is connected and have enough memory space. Using Preset Equalizer Curves Press EQ to toggle among FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM. The display shows your selection briefly and the relative icon lights on the display. Timer Source Tuner If TUNER REC is selected, press select the preset station. or to Bass Boost Press B. BOOST to turn on/off boosting the bass frequency. The BASS BOOST icon lights on the display when it is activated. Creating a Custom Curve 1. While CUSTOM is displayed, press or to cycle among displayed bass and treble range levels. While BAS and TRE is displayed, adjust volume control to set the associated gain between -10 - +10. [. . . ] · Check that PAUSE mode is not on. · Check that CD function is selected. · Try another CD. Problem CD sound skips Solution · Clean the disc. · Check disc for warping, scratches, or other damage. [. . . ]