User manual THOMSON CS96

[. . . ] Safety Information For UK Only CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPLY 230V. Note: The mains lead of the set is fitted with a moulded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below. The moulded plug cannot be rewired and if removed must be disposed of safely. [. . . ] Hearing experts warn against extended highvolume play. If you experience ringing in your ears, reduce volume or discontinue use. You should use with extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air designed to let you to hear outside sounds, do not turn up the volume so high that you are unable to hear what is around you. Top view Remote Control ON·ECO - Turns the unit on/off EQ - Selects among different sound effects (flat / classic / rock / pop / jazz) REPEAT - In CD mode - toggles repeat options (repeat disc / repeat track / repeat off). MIX - Selects random playback in CD mode. DISPLAY - In normal audio CD mode - toggles among displaying track elapse time, track remain time and disc remain time. In mp3 / WMA CD mode - toggles among displaying FILE name, FOLDER name, TITLE, ARTIST and ALBUM. In FM Tuner mode - toggles RDS station information (Frequency, RDS name, Radio text, RDS type, Clock time, RDS day and PI code) Side view 10cm Installing Batteries The remote control must be inserted with 2 "AA" or "UM-3" or "R6" batteries prior use. · 5cm · · Don't Infringe This product should only be used for the purposes for which it is sold, that is, entertainment, violating no copyright law. Any attempts to use this product for which it is not intended is unlawful and therefore not condoned by Thomson. Top View OPEN·CLOSE ­ Press to open the CD compartment door. · Settings Display WMA Settings 10. Repeat steps 2-5 to set timer off hour and minute. Wait while the unit reads and counts the total number of songs on the disc. If the CD compartment is not loaded with a CD or the CD is unreadable, the message "NO DISC" will be shown. Setting Sleep Time You can select the time interval in minutes before the unit turns off automatically. Press SLEEP on the remote control to toggle among OFF, 90, 80, 70, 60, 50, 40, 30, 20, and 10 minutes. FOLDER Press SLEEP again when the remaining sleep time is displayed to change sleep time. This unit is compatible with audio CD-R/RW discs. RP Timer will be activated automatically after settings are finished. Activating the Timer Setting the Clock 1. Press CLOCK·TIMER to enter clock setting mode. Press PROG·SET·CLEAR to shift to the minute digits. Press PROG·SET·CLEAR to confirm the setting. Press and hold CLOCK·TIMER for 2 seconds on the main unit to activate and deactivate the timer function. View Remaining Sleep Time When sleep is activated, press SLEEP once to view remaining sleep time in minutes. Note: Sleep is automatically deactivated when the unit is turned off. Notes on CD-R/RW · Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. · Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc. Setting the Timer 1. Press CLOCK·TIMER twice to enter timer on setting mode. Press PROG·SET·CLEAR to move to the minute digits. Press PROG·SET·CLEAR to move to source selection. Press or to select source (Tuner / CD / Tape / Rec TU) If Rec TU is selected, "TU PR 1" will be displayed. [. . . ] · Check that PAUSE mode is not on. · Check that CD function is selected. · Try another disc Problem CD sound skips Solution · Clean the disc. · Check disc for warping, scratches, or other damage. [. . . ]