User manual THOMSON DPL4000

[. . . ] Speakers and Antenna Speaker · Match the speaker to the correct terminal on the receiver (example: left speaker to left speaker terminal on receiver) · Connect the red speaker wire to the "+" terminal (both speaker and receiver) and the black speaker wire to the "-" terminal. Audio/Video components Follow the diagram to connect audio or video components. to AUDIO IN (VCR) to VIDEO IN (VCR) to S-VIDEO IN (TV) (if available) DVD To A/V Receiver Connection described below is also applicable for any component having digital output (Cable, Satellite, MD, CDRW recorder, TV) NOTE: · By default, the unit is set to use the Analog input from the DVD player. [. . . ] 6) to VIDEO IN (TV) SPEAKER HOOK-UP Follow the illustration and instructions provided to hook up your speakers. ANTENNA HOOK-UP to VIDEO OUT (VCR) to COMPONENT VIDEO INPUT (if available) Follow the diagram to connect your DVD player to receiver. Connect components capable of outputting digital signals like Dolby Digital (e. g. DVD player or Satellite/Cable Box) or standard PCM format digital signals (CD player). Read section on "Input Signal Setting" under "Advanced Sound Control" carefully to adjust the matching input settings. VOLUME H O M E T H E AT E R A U D I O V I D E O R E C E I V E R D P L 4 0 0 0 ON/ECO DVD BAND SOURCE TUNING MEMORY OK ST/M SETUP TEST TONE EQ DIGITAL INPUT SURR. MODE DSP MODE BASS/TREBLE OPEN/CLOSE MUTE LEVEL to AUDIO OUT (VCR) to AUDIO OUT (TV) PHONES L AUDIO R VIDEO S-VIDEO S-VIDEO OUT VIDEO OUT AUDIO OUT COAXIAL OUT OPTICAL OUT COMPONENT OUT V-AUX 4 5 S-video to S-video out (DVD) to COAXIAL OUT (DVD) to COMPONENT OUT(DVD) (if available) 1 Connect either the COAXIAL Antenna Wire Connection Push terminal tab down to insert wire. Cables To help you identify the cables used in audio-video, illustrations are provided below for your easy reference. RCA Audio cable (Analog) Composite Video Cable (Usually yellow) S-Video cable Optical Cable (Digital) Coaxial Cable (75 / Digital) or OPTICAL cable (not included) 2 Connect the RCA Audio cable. 3 Connect the video cable (composite, s-video or component video) 4 Select DVD 5 Press DIGITAL INPUT repeatedly to select the input being used (analog, coaxial, or optical) and release to validate. NOTE: To receive Dolby Digital / DTS signal, either a coaxial or optical cable must be connected; and in step 5, you have to select coaxial or optical input accordingly. 3 to VIDEO OUT (DVD) 2 1 to OPTICAL OUT (DVD) 3 to AUDIO OUT (DVD) Release tab to lock wire in the terminal. NOTE: Make sure the insulation is completely removed from the ends of the wire at all connection points. NOTE: Speakers and speaker cables are not provided. 1 Piece 1Piece Not Included Not Included Not Included Speaker Placement 1 Center Speaker: Positioned on top or below the TV set. 2 Front Speaker: Positioned on both sides of the TV with equal distances away from the TV. [. . . ] Le Gallo 92648 Boulogne Cedex FRANCE RCS nanterre B 322 019 464 TOCOM 55526130 Rev. 1 (EN) This guide will help you to set up your system through several illustrations. EN DPL4000 Quick Connect Guide [. . . ]