User manual THOMSON DPL590-INSTALLATION-HP

[. . . ] Speaker Placement 1 Center Speaker: Positioned on top or below the TV set. 2 Front Speaker: Positioned on both sides of the TV with equal distances away from the TV. [. . . ] Secure the support rod in place using the screw and washer provided as illustrated below. Left Rear Speaker (Surround) Quick THOMSON 46, quai Alphonse Le Gallo 92648 Boulogne Cedex FRANCE 55987210 (EN) www. thomson. net 3 Left Front Speaker 2 Connect Guide This guide will help you to set up your system through several illustrations. 1 Center 2. Move the TV support rod up and down as illustrated to adjust the height of the stand. Tighten the screw to fix the support rod in place. 2 3 Right Rear Speaker (Surround) 4 Subwoofer Right Front Speaker DPL590HT EN Speakers and FM Antenna Speaker · Match the speaker wire color to the speaker / receiver terminals as shown on the illustration. · Match the speaker to the correct terminal on the receiver (example: left speaker to left speaker terminal on receiver) Follow the illustration and instructions provided to hook up your speakers. Audio Components Follow the diagram to connect audio components. VCR DVD To Receiver Connection described below is also applicable for any component having digital output (Cable, Satellite, MD, CDRW recorder, TV) NOTE: · By default, DVD is set to use Analog. · After the connections are done, check the receiver and make sure it is set to the appropriate input. The input being used will be displayed after the source name. (DVD/OPT means DVD uses Optical Input) · To change input connection, follow step 3 to 6 as described below. · If a COAXIAL cable is used to connect DVD to the receiver, follow steps 3 to 6 and select COAXIAL. NOTE: · The color of the wire should be the same as that on the terminals. · Connect the striped color wire to the "-" terminal (both speaker and receiver) For details, please refer to Instruction manual chapter "Connecting the Speakers". TV Connections TVs with RF input may need a RF modulator (not included) for inputting audio signals. TV R L SPEAKER HOOK-UP ANTENNA HOOK-UP RF in RF cable to AUDIO OUT (TV) to AUDIO OUT (VCR) Follow the diagram to connect your DVD player to receiver. RF out AU Connect components capable of outputing digital signals like Dolby Digital (e. g. DVD player or Satelite/Cable Box) or standard PCM format digital signals (CD player). [. . . ] 5 Press the Left or Right adjustment buttons to select Digital Input setup. 6 Press the Up or Down adjustment buttons to select the input being used (analog, coaxial, or optical) and release to validate. AUDIO OUT [. . . ]