User manual THOMSON DPL907VD-LAST

[. . . ] You have to restart the unit by press the ON/ECO button on the main unit. The invalid icon appears on-screen ? · If an invalid icon appears on-screen when a button is pressed, it is probably because : 1. The DVD does not have this option /e. g. , angles. The function is not available on that part of the disc. You have requested a title or chapter number or search time that is not available. Video and audio There is no picture ? · Turn on the TV set. [. . . ] · Depending on the type of DVD, some segments limit language selection. The picture is not displayed in the correct format on the TV (4 x 3 or 16 x 9) · According to your TV, make the correct "TV Screen" setting in the set-up menu. VIDEO SECTION: Input ( Sensitivity/ Impedance ):1Vp-p/ 75ohm Output (Level/ Impedance): 1Vp-p/ 75 ohm Signal to noise ratio: 65dB The camera angle cannot be changed with the angle button ? · This function does not work when a DVD has not been recorded with a multi-camera angle system. Some DVDs use a multi-camera angle system only in certain portions of the disc. FM TUNER SECTION: Frequency Response: 40Hz ­ 15kHz +/-3dB Quieting: 24dBu Signal to Noise: 60dB(stereo) / 65dB(mono) Image Ratio: 40dB IF Rejection: 50dB The menu language is not the one you want ? · The menu language for your player has not been set during set-up. · Your preferred menu language on a DVD disc (if available) has not been set during set up. JPEG CD SECTION: Supported format - JPEG Audio (spoken) and / or subtitle language is not the one selected during the initial player set-up ? · If the audio or subtitle language is not available on the DVD disc, the language selected during initial player set-up will not be heard or seen. The disc's priority language (default language) is selected automatically. If you want another language, press menu during playback, if the disc has its own language selection menu. Dimensions (H x W x D cm) : Unit Front speaker Rear speaker - Center speaker Subwoofer - Radio STEREO indicator is off. · Adjust the antenna. The signal is Mono. Severe hum or noise. · The signal is too weak. Connect an external antenna. Pls provide infomation for this two parts. 41 DPL907VD-EN last 4/1/04 6:00 PM Page 4 Care and Maintenance Disconnect the audio system from the power source before performing any maintenance. Safety precautions · Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician. · Never operate this product with the cabinet removed. · Do not touch the player with wet hands. If any liquid enters the player cabinet, take the player to a trained technician for inspection. · This player uses a laser to read the data on the disc. The laser mechanism corresponds to the cartridge and stylus of a record player. Although this product incorporates a laser pick-up lens, it is completely safe when operated according to directions. · Discs rotate at high speed inside the player. Do not use damaged, warped, or cracked discs. · Do not touch the pick-up lens which is located inside the disc compartment. Also, to keep dust from collecting on the pick-up lens do not leave the compartment door open for an extended period of time. If the lens becomes dirty, clean it with a soft brush, or use an air blower brush designed for camera lenses. · The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Cleaning Clean the exterior of the system using a soft dust cloth. The player CAUTION!It must only be opened by a qualified technician. · Never move the player during playback. [. . . ] · Even if your headset is an open-air type designed to let you hear outside sounds, don't turn up the volume so high that you are unable to hear what is around you. Don't infringe This product should only be used for the purposes for which it is sold, that is, entertainment, violating no copyright law. Any attempts to use this product for which it is not intended is unlawful and therefore not condoned by Thomson. Disc lens care · When your disc lens gets dirty it can also cause the system to output poor sound and visual quality. To clean the lens you will need to purchase a disc lens cleaner which can maintain the output sound and visual quality of your system. For instructions on cleaning the disc lens, refer to the ones accompanying the lens cleaner. Important battery information · Remove the batteries to avoid leakage if you do not use your remote control for more than one month. [. . . ]