User manual THOMSON DPL950VD-DVD

[. . . ] Press PLAY/PAUSE on the main unit or PLAY on the remote to resume normal playback. 7 memo PRESET + 0 FWD PRESET + 8 0 FWD 9 clear PLAY REV clear PLAY ZOOM REC vcr PAUSE STOP PHONES PHONES ZOOM REC vcr PAUSE STOP · Press SKIP REVERSE to go back to the previous chapter or SKIP FORWARD to move to the next chapter. py tuner down tv PRESET PRESET + Freeze frame, frame advance 1. Press PAUSE on the remote control to freeze picture during playback. Each time you press it again, the picture advances one frame. Press PAUSE repeatedly to move forward in still frame. [. . . ] Press the up/down buttons to select among : Normal >Program edit/ Program play > Repeat AB > Repeat Title > Repeat Chapter > Normal 3. The box under "Title" will be highlighted automatically. tv dvd digital tape sat/cab video / vcr pty tuner down tv vcr/sat return OPEN/CLOSE EN info stereo delay tuner up level digital tuner up level tv dvd tuner tape sat/cab RDS video / vcr pty tuner down RDS hifi dvd /cd tuner menu hifi dvd /cd Use the arrows on the remote to select title and chapter. theater modes info stereo tv dvd digital tape sat/cab video tuner / vcr hifi d d / d OPEN/CLOSE stereo tv dvd digital level tape sat/cab video / vcr pty delay tuner up level delay tuner up 3. "Add" will be highlighted automatically after chapter is selected. Press OK to add selected track and chapter(s) onto playlist. stereo tv dvd digital tape sat/cab video / vcr pty tuner down RDS tuner up level delay tuner hifi dvd /cd RDS tuner down pt RDS tuner NOTE Random playback is not available in DVD mode. hifi dvd /cd 4. Move to highlight "Play" (start program playback) or "Done" (return normal playback with program saved), then press OK to start program playback or return to stop mode. stereo delay tv digital tape sat/cab tuner up level tape sat/cab video / vcr pty tuner down RDS dvd digital tuner up level stereo delay Program playback Edit program 1. Refer to previous page "General use" to open the playmode menu, or press and hold PROGRAM button on the main unit to enter program mode. Note: Program mode can only be activated during STOP / Resume mode. tv dvd tuner video / vcr pty tuner down / tuner RDS hifi dvd /cd hifi dvd /cd NOTE You can select at maximum 32 items by repeating steps 2 - 3. 23 DPL950-EN DVD new 5/7/03 10:11 AM Page 6 DVD Player Delete program 1. Select the program menu from the OSD banner, or press and hold the RPT/PROG. button on the main unit to display program edit playlist. Use the arrows on the remote to select and highlight the programmed item you want to delete on the playlist. tv dvd digital tape sat/cab video / vcr pty tuner down tv vcr/sat return OPEN/CLOSE 4. Use the LEFT and DOWN arrows to highlight "Insert" and then press OK. OPEN/CLOSE info stereo delay tuner up level tv dvd stereo digital tape sat/cab video / vcr pty delay tuner up level tv dvd digital tape sat/cab tuner tuner video / vcr hifi dvd /cd RDS tuner down info stereo delay tuner up level hifi dvd /cd pty tuner down RDS t /t tuner up level tv dvd t digital tuner tape sat/cab RDS video tuner / vcr hifi dvd /cd hifi dvd /cd 5. Use the arrow buttons to highlight "Play" (start program playback) or "Done" (return to normal playback with program saved) and then press OK. pty tuner down RDS menu 3. Highlight "Delete" and then press OK to delete item. OPEN/CLOSE Cancel program Program will be cancelled when; 1. The red PGM indicator will disappear on display and player will resume normal playback mode. info stereo delay tuner up level tv dvd digital tape sat/cab video / vcr pty tuner down RDS tuner hifi dvd /cd TV OUT signal selection If you connect your receiver to a monitor set equipped with a component input (using Y, Pr, Pb sockets), you must set the unit to COMPONENT VIDEO OUT, you can choose to use either the COMPONENT OUT or SCART output by the following procedures: 1. Press and hold the BASS/TRE/TV OUT button for 3 seconds. 4. Repeat steps 2 and 3 to delete additional items. Use the arrows to select and highlight "Play" (start program playback) or "Done" (return to normal playback with program saved) and then press OK. Insert chapter 1. Select the program menu from the OSD banner, or press and hold the RPT/PROG. button on the main unit to display program edit playlist. SOURCE BASS/TREBLE RPT/PROG. RROUND TV OUT 2. Press DOWN to select "Other" and then press OK. Enter language code into boxes and then select OK to return to main menu. Press OK on the remote. stereo tuner up level tv dvd digital delay tuner up level hifi dvd /cd RDS tuner video / vcr pty tuner down RDS hifi dvd /cd menu t /t t 3. [. . . ] Open the TV aspect menu. Dynamic range 1. To disable/enable the dynamic function, enter the dynamic range menu. EN Soft Softer 2. Use the UP or DOWN arrows to select TV aspect and then press OK to return to main menu. If you have a wide-screen (16:9) TV, choose "16:9 Widescreen". [. . . ]