User manual THOMSON DPL950VD-RECEIVER

[. . . ] DPL950-EN receiver new 5/7/03 10:35 AM Page 1 Safety Information Thomson Information CAUTION! Invisible laser radiation when open. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER = 780 nm, P max = 5 mW Rating Information: At bottom of the unit this unit comply with the existing requirements In accordance with the rating plate of the unit, this unit complies with current standards concerning electrical safety and electromagnetic compatibility. Please respect the environment Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling. [. . . ] All Rights Reserved. Dolby Digital Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "Pro Logic II" and the double-D symbol are trademarks of Dolby Laboratories. Copyright 1992-1997 Dolby Laboratories, Inc. All Rights Reserved. NOTE All preset radio stations and surround sound setting will be lost after factory setting is restored. 9 DPL950-EN receiver new 5/7/03 10:35 AM Page 14 Operating Your Receiver 1 6 2 7 8 13 4 5 11 9 10 BAND/APP SOURCE BASS/TREBLE RPT/PROG. VOLUME RANDOM SURROUND PRESET - PRESET + POWER/ECO PHONES 3 15 14 12 Receiver Controls 1. POWER / ECO · To turn the unit on (set the POWER/ECO swtich to the ON position) / off. (set the POWER/ECO swtich to the OFF position) When the system is turned on, the unit will go to Standby mode (red led will lit), then press the SOURCE button on the unit to power the unit up in the last mode used. · When the unit is in standby mode, press the Source button to power on the unit. Source Buttons · To select input source. SURROUND · Press repeatedly to select the surround sound setting or Digital Sound Processor (DSP) mode you want. Refer to "Advanced Sound Control" on page 16. ) 4. PRESET - / SKIP REVERSE · To move back to the beginning/previous preset memory location in tuner mode. · To skip to the beginning/previous track in CD mode and the beginning/previous chapter in DVD mode (only while playing). PRESET + / SKIP FORWARD · To go to the next preset memory location in tuner mode. · To skip to the next track in CD mode and the next chapter in DVD mode (only while playing). BAND / APP / RANDOM · In Tuner mode, press to select between radio BANDS or press and hold to enter AUTO PROGRAM mode. · In DVD/CD mode, press to activate Random function. BASS / TREBLE / TV OUTPUT · To adjust BASS / TREBLE, press this button once to choose either bass or treble, then press preset + and preset - to adjust level. (Bass/ treble adjustment is not allowed for DTS source) · Press and hold to swtich TV output mode (RGB SCART / SVideo), default is RGB SCART. 8. OPEN / CLOSE · Slightly touch to open / close the front panel. VOLUME Turn the knob to adjust volume level. PLAY/PAUSE To play and pause DVD/CD playback. REPEAT (RPT) / PROGRAM (PROG) · Press to choose different play mode in DVD/CD playback. [. . . ] If you wish to change the input formats, follow the steps below: 1. Press SOURCE on the main unit until SAT appears on the display or press the SAT/CAB source buttons on the remote control. Press DIGITAL on the remote control to toggle among optical analog to match your connection. Your selection will be stored automatically. [. . . ]