User manual THOMSON DSR100T

[. . . ] DSR 100 T GB 1/09/2000 16:29 Page 1 Safety Precautions Before using this device, please read the following carefully. · The apparatus shall not be exposed to dripping or splashing. · No objects filled with liquids, such as vases, shall be placed on the apparatus. · Power Requirements: AC 100 - 240V ~, 50/60Hz · Disassemble!: Do not attempt to disassemble the product since opening the cabinet may cause a malfunction or electric shock. [. . . ] - Rename: If you want to change the name of a channel, please take steps as follows. Select a channel which you want to change name then, press OK key to call up the alphanumeric charcter table. Enter the name by selecting the , , PR +, PR - keys followed by OK key. Press the " " characters using character to delete characters. Press ok column to confirm the changed name. Press EXIT key to save the changed name and then it will return to the previous menu. - Delete: When a channel selected to be deleted, the color of "NO" column will be changed to be yellow. Selected channel will be deleted on the channel list. Press EXIT key then the dialog box will come up. Select "OK" or "CANCEL". - Sort: There are five ways to sort the channels. When you select any one sort, the channels will be sorted accordingly. · Favorite: It will place the favorite channels at the top of the list. · Lock: It will place the locked channels to the last at the list. · Scramble: It will place scrambled channels to the last of the list. · Sat Name: It will rearranged the channels by satellite names in alphabetical order from A to Z. Name: It will rearranged the channels by name in alphabetical order from A to Z. 18 ENGLISH DSR 100 T GB 1/09/2000 16:29 Page 19 4. After finishing channel editing, press EXIT key then the dialog box will come up. Select "Yes" or "No", if your select "No" it will come back to the condition before editing and if you select "Yes", changed attributions will be saved. When you select any one sort, the channels will be sorted accordingly. Timer The "Timer" function allows you to program when the receiver switches on and off. To activate the "Turn On Time" and/or the "Turn Off Time", press the OK key on the "Timer" in the main menu. [. . . ] · Writing. . . data (In the software transfer menu. ): This is writing the uploaded software into the flash ROM of slave DSR. · Data Transfer Complete: Data transfer is completed · Precaution : Please be sure to prevent from interrupting power in the process of "Writing . . . In case of power interruption, the slave DSR will lose the software. 7. If you want to stop data transfer during the User Data Transfer or Software Transfer, select "Stop" and press OK key. [. . . ]