User manual THOMSON DTH 8543 ADDITIF

[. . . ] Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electricity supply. [. . . ] It is possible only on DVDs with Dolby Track 05 Surround or Dolby Digital. 2CH 64 This feature only operates from the Analog Audio Subtitle out and from the Scart connector. It will not operate Surround ENG On from the Digital Audio Out (optical), if "Digital Info 1/2 Intro Audio Out" or "MPEG-2 Digital Out" are set to "BITSTREAM" in the Audio options of the setup Info 2/2 menu (see page 25). The simulated surround effect depends on the disc contents. This technology is manufactured under license from Desper Products Inc. "SPATIALIZER R", "N-2-2 TM" and the "Circle in square" are Trademarks owned by Desper Products Inc. GB Audio language (for DVDs) During playback, with some discs, you can choose to hear other soundtrack languages (up to 8 if available) than the original one. The audio languages available on the disc are indicated on the back cover of your DVD disc box. According to the disc you will have to access to the Audio languages selection either with the red key ( , ) on your remote control or with the MENU key. These 2 possibilities are detailed in the A or B procedure below. The audio returns to the player's initial settings after the disc is removed or power is switched off. The initial settings have been made during the DVD player's set up on page 4. A - Using the player info display. In play mode, press the red key (8). Press OK (15) to memorise the begining of the scene you want to repeat. Wait few seconds before pressing again the OK (15) key to mark the end of the scene to be repeated (B point). A-B is displayed in yellow, repeat play starts. To define the "B" point of the (A-B) section, the player must be in Normal play mode. Do not use "REV key (26) or FWD key (28)", otherwise "A-B" Repeat mode will be lost. If the title or track is completed before marking the end B, the end of title or track automatically becomes B. Repeat play only works with discs that show the elapsed time on the display. It may not work correctly with some discs (Video CD, with PBC, Menu "On" mode). Repeat CD with TV Off For CDs, follow the steps below with the TV turned off. To repeat the track that is playing, press REPEAT (7) twice. To repeat the disc that is playing, press REPEAT (7) three times. To set an A-B repeat, press REPEAT four times. [. . . ] If you make just a few recordings on your disc the DVD player will take a long time searching for and locating these few tracks. 32 IB5000_5200GB 4/09/01 10:12 Page 33 Disc playback recommendations "Close the complete disc" at the end of recording. This means that no more recording can be added, later on, on this disc. Your home computer will only do this if you have ticked the right option in your recording program, at the end of the recording session. In the case of CD-R MP 3 discs, please follow all the recommendations for CD-R above, plus the comments below: Your MP3 files should be ISO 9660 or JOLIET format. [. . . ]