User manual THOMSON DTH115E

[. . . ] · This appliance is designed for continuous use. Switching off the DVD player to stand-by mode does not disconnect it from the mains supply. To completely isolate the equipment, remove the plug from the mains socket as some components remain connected to the electrical supply. · If you notice any burning or smoke, disconnect the appliance immediately to avoid any risk of electrocution. · Do not attempt to look inside the appliance through the disk tray opening or any other opening. You may be electrocuted or exposed to laser radiation. [. . . ] Keep this certificate as well as the invoice. These documents are required in the event of claiming your guarantee rights. · All repairs during the guarantee period must be carried out by an authorised engineer for our brand. If this condition is not met, your rights will no longer be valid. · Never open the appliance yourself, since this may put you at risk or damage the equipment. THOMSON does not accept any liability if the appliance is used in any way other than in accordance with this manual. DISCLAIMER OF WARRANTIES:TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, DECLARATIONS AND WARRANTIES OF NON-INFRINGEMENT OF COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHTS RESULTING FROM THE USE OF THE PRODUCT IN CONDITIONS OTHER THAN THOSE SPECIFIED ABOVE ARE HEREBY DISCLAIMED. JPEG files · CD-R and CD-RW with JPEG files. Certain JPEG files, including progressive JPEG files, cannot be read by this player. Kodak Picture CDs VCR TV AUDIO VIDEO OUT AV1 TV AUDIO VIDEO OUT (RGB) Technical data Power requirements:AC 230V, 50 Hz - Power consumption: 15W - Operating temperature: 5°C to 35°C (41°F to 95°F) - Operating humidity: 5 % to 90 % (no condensation) 1. Connect the DVD player Scart socket (TV AUDIO VIDEO OUT) to the television set's Scart socket (AV1, EXT1, AUX1) using a Scart lead (not provided). If your television set does not have two Scart sockets, connect the DVD player to the video recorder's AV2 socket using a Scart lead (not provided). If you have a satellite or cable receiver you can also connect the DVD player to the receiver's second Scart socket. Note: If your video recorder only has one Scart socket, but has a modulator, use the aerial cable to connect the video recorder to the television set, adjust the video recorder's modulator, then connect the DVD player to the video recorder's Scart socket. DVD copy protection In accordance with the DVD standard, your DVD player is equipped with a Copy Protection system, which can be switched on and off by the DVD disc itself, in order to make any recording of the relevant DVD disc onto a videotape of very poor picture quality, or even impossible. "This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. For 6-channel multichannel sound, connect the audio/video amplifier or receiver to this socket using a coaxial cable (not supplied). Playing JPEG and mp3 music files at the same time You can display JPEG files while listening to mp3 music files recorded on the same disc. Insert the disc containing the two types of file in the player. Select an mp3 music file using the and buttons, then press OK to confirm your selection. Then select a JPEG image file using the and buttons, then press OK to confirm your selection. Note:To delete your selection, press the CLEAR button. Dolby and the double-D symbol license from Dolby Laboratories. are trademarks of Dolby Laboratories. Manufactured under Advanced functions Audio (DVD, VCD and audio CD) Some discs have several audio tracks used for different languages or different audio formats. To change the language or audio format during play, press the AUDIO button one or more times to select one of the available audio formats or languages. Note:This option is only available if the disc offers a number of dialogue languages or audio formats. Basic Playback Operations Regional coding Your DVD player has been designed to process regional management information that is stored on DVD discs. DVD discs that have different regional codes to that of your player cannot be played. The regional code for your player is 2 (Europe, the Middle East, South Africa, Japan). ALL means all regions. When you buy a disc check that it bears the correct logo. Dynamic You can use this function to control the different sound levels via dynamic compression. It improves the quality of the sound track at a low volume and quietens the loudest sounds. Select an option using the and buttons, and press OK to confirm. Note:This function is available only on DVD discs recorded in Dolby Digital. 4. Press OK to start playing the two files at the same time. To rent (purchase) DivX®VOD files DivX VOD files are downloaded after paying a rental from certain commercial websites. [. . . ] While a disc is playing, press the ZOOM button until you reach the zoom size you require. Move from one area to another using the , , and buttons. It is impossible to read the disc. · Insert the disc with the printed side facing up. · Check that the disc can actually be played by this device (see below). · Check that the disc's regional code matches the player's regional code. This player's regional code is 2. [. . . ]