User manual THOMSON DTH210E

[. . . ] DTH210E_EN 22/03/02 10:47 Page 1 Precautions Setting up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy equipments on top of the player. [. . . ] DVDs are recorded in 48kHz / 16 bits, or even up to 96kHz / 24 bits. 13 DTH210E_EN 22/03/02 10:48 Page 14 Basic functions Loading a disc Loading a "single-sided" disc Navigation keys 1. Open the disc tray by pressing the OPEN / CLOSE key. The disc label must face upwards (Audio CD, Video CD, single-sided DVD (1), etc. ) 3. Close the disc tray by pressing the OPEN / CLOSE key. 1. Double-sided discs have a small label on both sides near the centre. With most DVDs, a disc-specific menu appears. In that case, follow the instructions. Playing a disc Disc playback starts as soon as the tray is closed (if programmed k page 16). If it doesn't start automatically, press PLAY. Press OK to start playback or select another option (4), in the disc menu using the Navigation keys. With an audio CD or video CD, playback starts. To access a specific CD track, DVD title or chapter, press the INFO key to display the Info banner (k page 11) or press Pr +. To stop playback momentarily (2) press STOP once. Press twice to stop it completely (3). 2. The player has memorised the last scene on the disc. If you now press PLAY: playback starts from this point. Your player records which was the last scene it played in each of the last 5 DVDs. Resume memory does not work with interactive discs (without elapsed play time information). 3. If the player is left in STOP mode for more than 2 minutes without any user interaction, a screen saver will be activated (fade in / fade out). After about 30 minutes have elapsed in STOP mode without user interaction, the player will be automatically switched off. Depending on the DVDs, it may be possible to change the language during playback (k page 23). 4. Quick search of images or a track In Play mode, start the Forward or Reverse fast motion playback (1) using the FWD or REV keys (2). 1. 2. Press once or several times for higher speeds. You can also use the player keys. In search mode, no sound is heard on DVDs. 14 DTH210E_EN 22/03/02 10:48 Page 15 Navigation keys Some DVDs contain several titles. These titles correspond to films, documentaries or other programs. As a general rule, each title is divided into numbered chapters. On audio CDs, the music tracks can be accessed directly. [. . . ] Point the remote control to the front of the player. Operate the remote control within an 8 m range from the player. Remove any obstacles between the remote control and the red LED on the player. There is no sound or it can hardly be heard? [. . . ]