User manual THOMSON DTH4000

[. . . ] DTH4000-GB-BEI 5/05/00 9:48 Page 1 Precautions 1 - Setting up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy devices on top of the player. [. . . ] This feature only operates from the Analog Audio out and from the Scart connector. It will not operate from the Digital Audio Out (optical), if "Digital Audio Out" or "MPEG-2 Digital Out" are set to "BITSTREAM" in the Audio options of the setup menu (see page 15). The simulated surround effect depends on the disc contents. This technology is manufactured under license from Desper Products Inc. "SPATIALIZER R", "N-2-2 TM" and the "Circle in square" are Trademarks owned by Desper Products Inc. Audio language (for DVDs) With some discs, it is possible to change the language of a film and its subtitles. Two coloured keys ( , ) on your remote control offer easy access to this function while viewing. Temporary change of languages (audio, subtitles) may also be possible by pressing the MENU key (19) during playback. A movie or video programme may be recorded in more than one language (up to 8) on the disc. So you can hear the dialogue in your own language (if available) or in the original language of the movie. You have to perform either A or B setting. A - Using the player info display. 1 2 Press PLAY (27) to start playback. Press the red key (8); the audio display appears on-screen with (possibly) the abbreviation of the language and the corresponding audio format. Select a language with the arrows (14, 17) . To exit the Audio display, press the red key (8). Press CLEAR (25) to remove the banner without making changes. DISC MENU ENG DOLBY DIGITAL 5. 1 CH 3 4 FRA MPEG-2 2 CH B - Using the Disc Menu (if available). 1 2 Press PLAY (27) to start playback. Press the MENU key (19); the menu of the disc appears onscreen with (possibly) the Audio languages for dialogues available on that particular DVD disc. Select the desired language with the arrows (14, 17), then press OK (15) to confirm. 1 2 3 4 Dialogue Language English Deutsch Franais Italiano 3 24 DTH4000-GB-BEI 5/05/00 9:50 Page 25 Subtitle languages With some discs, it is possible to change the language of a film and its subtitles. Two coloured keys ( , ) on your remote control offer easy access to this function while viewing. Temporary change of languages (audio, subtitles) may also be possible by pressing the MENU key (19) during playback. All the changes (audio, subtitles) return to the player's initial settings after the disc is removed or power is switched off. Subtitles on / off (for DVDs) 1 2 Press PLAY (27) to start playback. Press the green key (9); you see the subtitles display on-screen with (possibly) the abbreviation of the language. Use the Use the arrows (18, 16) to highlight "On". (18, 16) arrows to switch "On" or "Off" the subtitles. ENG On GB 3 4 5 ENG Off To exit subtitle display press the green key (9). [. . . ] The picture is not displayed in According to your TV, make the correct "Screen format" setting in the correct format on the TV the set-up menu. (4 x 3 or 16 x 9) The screen Ratio cannot be The screen Ratio may be fixed on your DVD disc. Do not use zoom function on your TV, as parts of the picture and changed menu may be lost. The setting of "On-Screen messages" is set to "Off". [. . . ]