User manual THOMSON DTH5400

[. . . ] IB5400GB 3/09/01 16:13 Page 1 Precautions 1 - Setting up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy equipments on top of the player. [. . . ] Repeat functions remain active until you turn them off, open the disc tray or turn off the power. Title Angle 1/3 Repeat Track 05 Chapter Time Master Vol. Audio:ENG 64 2CH Surround Subtitle On ENG Intro Info 1/2 Info 2/2 Repeat a scene between point A and point B. Press info key twice then select select the repeat function and choose A-B on screen using the Navigation keys, The letter A turn from white to yellow. Press ok (15) to memorise the begining of the scene you want to repeat. Wait few seconds before pressing again the ok (15) key to mark the end of the scene to be repeated (B point). A-B is displayed in yellow, repeat play starts. To define the "B" point of the (A-B) section, the player must be in Normal play mode. Do not use "REV key (26) or FWD key (28)", otherwise "A-B" Repeat mode will be lost. If the title or track is completed before marking the end B, the end of title or track automatically becomes B. Repeat play only works with discs that show the elapsed time on the display. It may not work correctly with some discs (Video CD, with PBC, Menu "On" mode). Repeat CD with TV Off For CDs, follow the steps below with the TV turned off. To repeat the track that is playing, press repeat (7) twice. To repeat the disc that is playing, press repeat (7) three times. To set an A-B repeat, press repeat four times. Press ok to set the starting point of the segment. Let the disc play to the B point, then press ok again. To cancel the repeat, press clear (25). Slow Repeat Put the player in Frame advance mode by pressing successively the PLAY (27), PAUSE (30), FWD (28) keys. Press repeatedly the FWD (28) key to chose the slow motion speed (1/8, 1/4, . . . . ). Display the second Info banner by pressing twice the info (10) key. Select the Repeat function then proceed as for the repetition of a scene between 2 points A and B : press ok once for the A point; press ok a second time for the B point; press ok again to start the Slow Repeat). Title Angle 1/3 Repeat Track 05 Chapter Time Audio:ENG Master Vol. 64 2CH Subtitle ENG Info 1/2 Surround On Intro Info 2/2 20 IB5400GB 3/09/01 16:14 Page 21 Programme Play Programme play (for DVDs and Audio CDs) The programme play function allows you to programme the CD tracks or DVD disc chapters you want to play. Program playback lets you set up a specific order for DVD / Audio CD / Video CD playback up to 20 chapters / tracks. Program playback is not available when you play Video CD in PBC mode when Video CD Menu is "ON" mode (see p. [. . . ] ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. These two formats are the most widely used. When naming your MP3 files do not exceed 8 characters, and place ". mp3" as the file extension. When composing your title ensure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: ( . [. . . ]