User manual THOMSON DTH700

[. . . ] DTH700_EN 13/08/02 15:25 Page 1 Precautions Setting up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy equipments on top of the player. [. . . ] (enter 001205 to access a scene which is 12 minutes and 5 seconds away from the start of the disc (DVD) or track). With certain discs, direct access to a scene is not possible even if the time elapsed is shown on the banner. It indicates that the function is not available or that the key used is incorrect. A question mark in the counter zone indicates an input error. ? 16 DTH700_EN 13/08/02 15:26 Page 17 Play modes Load a disc and press STOP. select Play Mode using the Navigation keys, press ok to validate, select a function using the Navigation keys, adjust the setting using the Navigation keys. Navigation keys Your player has several Play modes: Standard play which follows the order of the tracks, titles and chapters on the discs; Random play which plays the sequences or music tracks in a random order; Program play which allows you to choose the sequences or music tracks and the order in which they are to be played; Auto play which starts playback as soon as the disc tray is closed. EN Audio CD Standard play Random Play Program Play Edit Program Auto Play Introscan Bonus Group Video DVD Audio DVD CD MP3 Video CD x x x x x x x x x x x x x x x x x x x x x For the display and use of the menus, refer to page 10. The functions available in each Play mode depend on the type of disc played (DVD, Video CD, Audio CD, etc. ). Auto Play or Standard playback Choose Auto Play On with the ok key if you wish the disk to be automatically read after closing the drawer. If you select Auto Play Off, you will need to press PLAY to start playback. Random play (Audio CD) Choose Random Play (1) with the ok key to listen to audio CD (2) or to watch a DVD in any order determined by your drive. 1. Random play is not available if the Lock Player function is enabled. It does not work with Video CDs. 2. Audio CD - This function can also be accessed through the banners (k page 11). 17 DTH700_EN 13/08/02 15:26 Page 18 Navigation keys Programming playback To use the programmed play function, you must first make up the list of music tracks (Audio CD or MP3 CD) or chapters (DVD) you want to play. You can memorise up to 20 tracks or chapters. Select Edit Program with the Navigation keys then validate with ok. Follow instructions a, b, c, d to make up your selection. Choose a title then a chapter (or a track only for an Audio CD or MP3 CD) using the Navigation keys or the remote control number keys. Select Add (1) then press ok to validate. Check that the title has been memorised in table (2). c. Repeat steps a and b as many times as you wish. Select Play and validate by pressing ok to start programmed playback (2). 1. To remove a section or range select it in the list then select Delete and validate with ok. If you wish to insert a title between 2 other titles, Add will be replaced by Insert. 2. 3. With an audio CD, the track of the song and its playing time will appear in the table. With a DVD, the title and chapter numbers will be displayed in the table. To exit the programming function, press the return key on the remote control. Program play (for DVDs and Audio CDs) Select Program Play if you want to listen to an audio CD or watch a DVD in the order that you have pre-programmed using a list (1). To choose the reading order see above and display the list by selecting Edit Program. 1. If you haven't made up your list, program play will not be possible. Bonus access (for Audio DVDs) Some Audio DVDs offer hidden information that you can only access after you enter a password (1). Select Bonus Group and press ok to validate. Enter the password and then enjoy the Bonuses offered on the disc. 1. The password is generally shown on the disc cover or can be found on the disc publisher's Web site. 18 DTH700_EN 13/08/02 15:27 Page 19 Repeat playback / Sequence marking Repeat play Navigation keys To repeat the playback of a title, chapter, track, scene, selected A-B segment or entire disc. Your player enables you to mark your favourite DVD scenes or music tracks on audio CDs thanks to a marking function accessible through the banner. Select the Repeat Mode icon in the banner using the Navigation keys. [. . . ] If the audio or subtitle language is not available on the DVD disc, the language selected during initial player set-up will not be heard or seen. The disc's priority language (default language) is selected automatically. If you want another language, press " " key and " " key to select it temporarily for this disc (Or press menu during playback, if the disc has its own language selection menu). If you forget your code key number for the parental rating (locking) function, you must do the following: Open the player's disc tray and, if it contains a disc, remove the disc. [. . . ]