User manual THOMSON GRUNDIG ESP2000

[. . . ] The blinking receiving tower symbol becomes steady. The time signal is transmitted four times a day to auto-adjust the clock. -If this unit is out of the signal area: Press MODE button (9) once, the clock changes to normal clock mode. To set the correct time, hold SET button (13) for two seconds to enter set mode. [. . . ] Setting Alarm ON/OFF To turn alarm l ON: Press ALARM button (10) until the display shows both the alarm time and Press MODE button (9) until it returns to normal month and date display. To turn alarm l OFF: Press ALARM button (1 0) until the display shows both OFF and MODE button (9) until it returns to normal month and date display. symbol. symbol. Press To turn alarm2 ON: Press ALARM button (12) until the display shows both the alarm time and Press MODE button (9) until it returns to normal month and date display. To turn alarm2 OFF: Press ALARM button (12) until the display shows both OFF and MODE button (9) until it returns to normal month and date display. symbol. symbol. Press Wake to Radio: If the function slide switch (6) is set to RADIO position, the radio will come on automatically when the preset alarm time is reached. Wake to soothing sound: If the function slide switch (6) is set to SOUND, the soothing sound will come on automatically when the preset alarm time is reached. Wake to Alarm: If the function slide switch (6) is set to BEEP position, the alarm will come on for two minutes automatically when the preset alarm time is reached. Snooze: Press SNOOZE button (8) once within two minutes (or two minutes later, the alarm will stop automatically) to stop radio or alarm temporarily and give you extra eight minutes of sleep. Within this period, the symbol 'SNOOZE, shows on the LCD display (20). After eight minutes, radio or alarm will come on again. It will repeat if you press the SNOOZE button (8) again within two minutes. To stop the radio or alarm: To stop it, press any control button once except for SNOOZE button, or just wait for two minutes (the alarm will stop automatically). Selecting 5 Day Alarm / 7 Day Alarm Press 1-5 / 1-7 button (11) to select 1-5 or 1-7 alarm. 12/24 Hour Format Hold down the SNOOZE button (8) for five seconds to change from a 12 hour format to a 24 hour format. Setting Time Zone For USA Hold SET button (13) for two seconds to enter set mode. Press SET button (13) four times to enter zone setting mode. When the LCD display (13) shows the map flashing, press UP (10) or DOWN button (12) to select your US time zone. 1) Daylight Savings Set-Up: Press MODE button (9) once, then press (10) or (12) button to set summer time on/off. [. . . ] Important Note This clock is designed as a consumer use item, NOT as scientific equipment. The success of time reception is not guaranteed; it is subject to environmental conditions and the distance from the signal source. This clock is designed for indoor use only. Please avoid high humidity, high temperature, vibration and shock. [. . . ]