User manual THOMSON ITC008

[. . . ] ITC008_en 3/03/03 16:33 Page 1 About this manual This manual is common to several TV models. Therefore, the model you bought may not support some of the functions or settings described hereinafter. The mains plug must be easily accessible. In the following cases, we recommend that you pull out the mains connector: 1. In such a case, it is advisable that you also disconnect the TV set from the aerial socket. [. . . ] using the Up/Down directional Automatic Channel Set-up With the Automatic Channel Set-up · When a VCR or satellite receiver is connected to the aerial socket, you must switch on this equipment. Should external equipment be connected to the TV set via the SCART socket, it must be turned off. The first time you switch your TV set on, the automatic installation (AUTO INSTALL. ) will automatically appear. If it does not, you will find this menu by pressing a number of times on the remote control MENU key: - 2 times for the mono TV sets. The installation menu (INSTALL. ) is displayed and the Auto. Press the ok key on the remote control unit to display the AUTO. · Depending on the model of your TV set, you'll have to select from the options listed below the one that fits with your country: EURO : Western Europe, Tunisia, Morocco, Australia, New Zealand. UK : United Kingdom, Eire, DK : Eastern Europe, Middle East, Africa, French DOM-TOM, Asia. Select corresponding option by means of the directional keys Left/Right. · Select the Start line through the Up/Down directional keys. 3. Press and hold down the ok key: the channel is deleted. Prior to leaving the menu, you should check whether the programmes are stored in the order you prefer. Once your channels are duly sorted, close the menu through EXIT. You may recall this menu by pressing the MENU key: - 2 times for the mono TV sets, - 3 times for the stereo TV sets. Note: For channels diffusing teletext in Czech, Slovak, Rumanian, Croat, Russian or Greek. After having tuned in the channel, display the manual channel set-up menu (see page 5). - Select the Text line by pressing 5 times on the Down button of the remote control. - Select the number of the character table, using the table on page 7. - Memorise it with ok and then quit the menu with EXIT. 4 ITC008_en 3/03/03 16:33 Page 5 Manual Channel Set-up With the manual set-up 1. menu by pressing MENU on the remote control unit: - Twice for mono TV sets. Select the Manual line using the Up/Down directional keys. Press ok to display the manual installation menu (MAN. [. . . ] Videotext display The blue key enables you to superpose a videotext page on the standard TV picture and to switch back to the standard TV picture. Fastext When videotext pages are broadcast as per the Fastext standard, you can use the corresponding colour keys to select one out of the 4 headings displayed in the footer. Selection of a given heading may have the effect to display further headings. Certain programmes use videotext to broadcast subtitles, as well as constantly updated news. [. . . ]