User manual THOMSON LCD-IFC130

[. . . ] In the interest of improving the quality of our products, we reserve the right to modify their features. The information in this manual is, therefore, subject to change and does not represent any kind of contract. This product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic product. [. . . ] This process deletes all channels previously stored. To set up a new channel, it is better to use Automatic update or Manual Installation. 7 IFC130-L_EN 4/08/05 17:23 Page 8 General operation Switching the TV set on and off To switch the TV set on: - press the button on the side of the TV set, the or any numeric button on the remote control, or - press the TV, OK or PR+/PR- buttons to switch the television on at the last channel or AV programme you were watching, or Accessing AV programmes Press the AV button to display the last selected audio-visual programme and scan through the other audio-visual programmes. AV selection loop: AV1, AV2, AV3, CMP (= component, YPrPb or YCrCb), VGA, HDMI. EN - press the AV button to switch the television on at the last AV programme you were watching. To put the TV set into standby mode, press the button on the side of the TV set or the button on the remote control. The TV set remains powered up, but with low energy consumption. To switch off the TV set, unplug the mains socket from the mains outlet. Volume Volume control: use the ¦ VOL buttons on the side of the TV set or press the +/- buttons on the remote control to increase or decrease the volume. Sound mute: press the button to temporarily mute the sound. Press this button again or the + button to restore it. Accessing channels Using the numeric buttons: for channels 1 to 9, press the corresponding numeric button; for channels 10 to 99, - press the tens digit for a few seconds to display it on the screen, then press the units digit. For instance, for programme 24, press and hold 2 to display 2-, then press 4; or - press the 0/-- button to display "--", then enter the two digits. Using the PR+/PR- buttons: scroll through the channels. AV programmes are not included in the cycle unless you use the buttons on the side of the TV set. Using the list of programmes: refer to page 9. Select the Sound option and press OK to confirm. The Sound menu appears with the following options: . . . Off . . . Tone control: this option gives you access to the Tone control menu (more details below). Note: In the case of AV sources, this option is not available if you have selected BBE ViVA under Sound mode. EN Sound type: select a sound type from the list using the buttons. The default sound type is Automatic for mono sources, Stereo for stereo sources and Stereo for AV sources. Note: The options offered depend on the programme you're watching. Refer to the table 1 opposite. 1 Broadcast Mono Stereo Dual NICAM - 3 Analog AV Sound types Automatic - Mono Mono - Stereo Sound 1 - Sound 2 Sound 1 - Sound 2 - Sound 3 Stereo - Sound 1 - Sound 2 Sound mode: use the default mode. buttons to choose a mode from the list. BBE ViVA is the Notes: - The options available depend on the sound type selected. - BBE ViVA technology can be used to achieve a 3D sound effect using just two loudspeakers, while preserving the quality of the sound transmitted by the main speaker, such as dialogue. Balance: use the buttons to balance the sound between the left and right speakers. Dynamic Bass: this function is used to strengthen the bass. Select an option from the list using the buttons. Note: This option is not available if you have selected BBE ViVA under the Sound mode option. 2 Sound type Automatic Mono Stereo Sound 1 Sound 2 Sound 3 Sound modes Normal - Wide - BBE ViVA Normal - Wide - BBE ViVA Normal - Stereo wide BBE ViVA Normal - Wide - BBE ViVA Normal - Wide - BBE ViVA Normal - Wide - BBE ViVA Auto Volume Level: check the box by pressing the OK button, if you want to keep the same sound level for all channels. Sound effect: this function allows you to create sound effects. Select an option from the list using the buttons. Internal speakers: uncheck this box by pressing OK if you want to stop the sound coming from the internal speakers and connect external speakers to the TV set. If you unplug these external speakers, remember to check the box to reactivate the TV set's internal speakers (otherwise you will not get any sound). Headphone: this option allows access to the headphone setting menu (see further below). [. . . ] You can then enter the four digits of the sub-page number using the numeric buttons (e. g. 0003). Alarm page In some countries (Spain, Benelux, etc. ), you can set a time to display certain Teletext pages (alarm pages). To do this, display the relevant alarm page and enter subpage mode. Enter the time instead of the subpage number (e. g. [. . . ]