User manual THOMSON M3615UT

[. . . ] Replace the batteries when the unit no longer operates at normal viewing distances. When replacing batteries do not mix old and new - do not mix makes and types. alkaline types are recommended for long life. Never risk damage to the remote control by extreme heat - do not leave close to a radiator or on a window ledge in direct sunshine. 1 Connections 220 - 240V ~ 50Hz 2 1. [. . . ] If the picture corresponds to the channel required, go to the 4th line (PR), otherwise continue the search. If you wish to stop the automatic search, press the button. 2. Programme Number and Storing in Memory Select the 4th line of the menu using the button. UK VL PR If fine tuning is necessary, see Fine Tuning Enter a programme number using the numerical buttons of the remote control. You can also use the buttons. button. Store the programme number you have allocated to the channel by pressing the The 2nd line of the menu is then selected again. Restart the search using the buttons. 7 3. Fine Tuning Only necessary in the event of interference If fine tuning is necessary, select the 3rd line of the menu using the button. buttons. PR UK VL If necessary, adjust the picture using the Select the 4th line (PR) using the button to allocate a programme number to the channel and store it in memory (see Programme Number and Storing in Memory) If a channel has required fine tuning, it will be stored in memory with the AFC (Automatic Frequency Control) deactivated. Press the button to leave the menu. 8 Picture Adjustments Press the button to call up the Picture Menu. = BRIGHTNESS = COLOUR = CONTRAST = SHARPNESS = TINT Select the function to be adjusted using the The tint function is only active in NTSC mode. Adjust as required using the buttons. buttons. Storing Personal Adjustments You can store the adjustments you have just made and call them up at a later stage. Caution: these personal adjustments will replace and delete the standard settings made at the factory. With the Picture Menu displayed, press the red Press the button to leave the menu. button. Sleep Timer Press the green Menu. Set the stand­by time in 10­minute steps (up to 4 hours) using the the Press the buttons button to leave the menu : button to call up the Stand­by The television set is child locked when the programmed time period has elapsed. The stand­by indicator will flash (see Day to Day Operation). To cancel the sleep time function: ­ press the green ­ press the button to call up the menu. button once or several times to return to: ­:­­ When the display indicates ­:­­, the sleep timer function is deactivated. The sleep timer function is also deactivated when the television set is switched to stand­by from the main ON/OFF switch. The television is then child locked and the stand­by indicator flashes (see Day to Day Operation). 9 Day to Day Operation Switching On - Selecting Programmes Switch on the television set using the main ON/OFF switch if the indicator is off. If it is on, enter the desired programme number. For programmes 1 to 9: Press the corresponding number on the remote control. 24) : Press and hold the decimal (tens) number (2): 2 then press the units (4) number briefly: 2 4 Volume Adjustment - Sound Mute Press the buttons to turn the sound up or down. Press the The sound returns if the button is pressed again. Zapping Press the buttons to scroll through the programmes stored in memory. Personal Adjustments Press the red button to call up your personal adjustments (See Picture Adjustments). Display Press the yellow button to display the programme number and stand­by time (if sleep timer command is activated). If the channel has been fine tuned, the This information disappears automatically after a few seconds. Press the yellow again to delete this information. button Stand-by - Sleep Timer Press the button to switch the television set to stand­by mode. The television set will automatically switch to Stand­by after a few minutes if there is no signal on the channel being watched. Child Lock You can prevent the use of your television set using the keypad. [. . . ] PLEASE NOTE: It will not be necessary for the dealer or purchaser to return this guarantee to Thomson multimedia Limited when making a claim under guarantee, unless requested to do so, provided that the model and serial numbers, date of sale, and the purchaser's name and address are quoted on the order or advice note. Dealer's stamp or name and address. Terms of Guarantee 1. The component parts used in this television receiver, with the exception of the colour picture tube, are guaranteed by Thomson multimedia Limited against failure due to faulty material or workmanship for a period of one year from the date of purchase. The colour picture tube is guaranteed separately for one year unless extended at the time of purchase, see "Picture Tube Guarantee". [. . . ]