User manual THOMSON M3673GCT

[. . . ] M 3673 GC - M 3673 GCT COLOUR TELEVISION MAINS CONNECTION AND REMOTE BATTERIES MAINS CONNECTION The TV is suitable for use on a. c. NOTE : The mains lead of the TV is fitted with a moulded plug. If the mains sockets are not compatible or if for any reason the plug is removed please follow these directions : The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock. [. . . ] Switch the television to Stand-By. The Stand-By light flashes. The television will switch on to the selected channel at the time programmed. The symbol appears on the bottom right of the screen. It will automatically switch off after five minutes if no key is pressed on the remote control or on the television keypad. If the set is switched on before the alarm function is activated, it will not switch to the programme selected for the alarm at the programmed time. It is possible to programme both the automatic switching off (SLEEP TIMER) and switching on (ALARM). In this case, the automatic switching on time must be programmed to take place after the switching off time. - 11 - MANUAL CHANNEL SETTING MENU MENU Press briefly to call up the main menu. MENU Press repeatedly to select the Program. : X X Name : -- -- -- -- UK + While the television is in any AV mode, (audiovisual), PROGRAM. VT -- /+ Press briefly to display the menu. CHANNEL SEARCH MENU PROGRAM. If you do not know the channel numbers STOP FUNC. Start the search by pressing : -- : backward channel search. + : Forward channel search. The cursor will move and the channel numbers are displayed on the CH line when received via the aerial or on the CC line for cable network. Once a station has been received, the picture appears on the screen. If the picture, corresponds to the station required, go to the line, otherwise continue the search. If you already know the channel numbers MENU 0 AV / 6 Select the CH line for TV channels (aerial) or CC for cable networks. Enter the channel number (it must have 2 digits). If your VCR is connected by RF cable and if you do not find the VCR output through Autoprogramming, set channel to 38 or 60 (see User Manual of your VCR) and use fine tune up and down until the VCR output is found. Once found, then memorise the frequency against your chosen programme number (eg9). FINE TUNING (OPTIONAL) Fine tune can be used to remove interference if necessary. Press briefly to select the line. PROGRAM. Norm : CH X X CC -- /+ UK MENU STOP FUNC. VT Press + or -- to change the picture as necessary. Program. : X X Name : -- -- -- -- If you have a decoder to receive a scrambled channel, the TV set goes into AV when this channel is being received. In this case, disconnect the SCART socket from your decoder and call up the PROGRAM. [. . . ] Make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. ° ° 5 cm 10 cm 10 cm ° 10 cm 10 cm - 19 - PERITELEVISION (SCART) PIN CONNECTIONS Video inputs Composite video or sync: Pin 20 (pin 17 return). Video output Composite video: Pin 19 (pin 17 return). Audio inputs A­Pin 6 (pin 4 return). [. . . ]