User manual THOMSON M5510GT

[. . . ] Any operation performed by a non skilled person, change of high voltage or replacement of the teletube by a model not complying with the manufacturer specification are likely to cause considerable increase in X-radiation. A TV set modified in such a way no longer complies with the manufacturer specification and shall not be put in operation again. About cleaning The screen is to be cleaned with liquid glass cleaners. Clean the front side and the housing with a soft cloth soaked with neutral cleaner. Do not use solvents, such as white spirit or alcohol-based cleaning products since they are likely to deteriorate your equipment. [. . . ] Because it contains safety components we cannot recommend re-wiring. 2 3 4 * If included. 2 The remote control Switching the TV set on standby - Videotext keys. - Display of channel, stand-by time ( ) - Personal Adjustments ( - Timer ( ) Info ) / list text Directional keys Up/Down, Left/Right for selection and validation key (ok) exit menu pr pr 1 4 7 av 2 5 8 0 3 6 9 menu is for calling up the menu windows. exit for erasing the menu windows or information from the screen. volume control mute : programme change for channel selection and number input in the menus. To key in two-digit channels (example: 10, 11, 12, etc. ), hold the first digit key down to call the placeholder dash on the display (1-), then enter the second digit. to select one of the appliances connected via the AV sockets Please respect the environment!Before throwing any batteries away, consult your distributor who may be able to them back for specific recycling. 1 2 3 3 GB About the TV set Prior to enjoying your TV set, you'll have to set it up, i. e. to find and store the channels, which may be received in your area. The Automatic Channel Set-up feature will find and store all channels for you by assigning a channel number to any programme and sorting the channel numbers. Since the channel numbers assigned to the programmes by the Automatic Channel Set-up do not necessarily correspond to the actual number of the channels (example: Channel 4), you may change them upon completion of Automatic Channel Set-up. With the On/Off-button fitted on the set. When the red LED is lit, the TV set has previously been switched on standby with the key B on the remote control. To switch the TV set on again, type in a channel number. When the green LED is lit, the TV set is switched on. Select corresponding option by means of the directional keys Left/Right. Start the Automatic Channel Set-up by pressing the ok key. You'll have to wait a couple of minutes until the pictures of programme PR 01 are displayed in the background. To identify each channel, make use of your TV magazine to find out the actual name of the current programme/channel. Use the key pr+ and pr- to select the channel number you wish to change. Then key in the new channel number on the remote control. The corresponding programme is now stored under the new channel number. Delete any programme the picture quality of which appears to be poor. Select the channel with the key pr+ and pr-. Then validate with ok: the channel number is now deleted. [. . . ] To cancel, first press the Green key and then, by means of the directional key Left, reset the time remaining on -:--. When the programmed remaining time is over, the TV set will switch on standby. Switching the TV set off by means of the On/Off-button deactivates programmed switching-off. 5 GB How to use Videotext?(If included) Press the key text to display the Summary (page 100). Calling up a page How to prevent the TV set from being operated? [. . . ]