User manual THOMSON MPC-STD QUICK INSTALLATION GUIDE

[. . . ] Quick Installation Guide for MPC-STD The Thomson Technology MPC-STD is a multi-protocol converter. This Quick Installation Guide will describe the method to interface a PC to either a MEC 20 or TSC 800 controller over an RS 485/232 serial interface. Check Components: Qty 1 2 1 1 1 1 Description MPC-STD protocol Converter RJ45 to DB9M Converter RJ45 to DB9F Converter 6ft Ethernet Cable (CAT5-STP) 10ft Ethernet Cable (CAT5-STP) Software & Documentation CD-ROM* *MPC Gateway Utility Software ­Download from www. thomsontechnology. com Customer Required Components: Qty 1 Description 24VDC power supply (min 12Vdc, max 30Vdc), 100mA max. NOTE: 1. Modscan32 software is needed for Check/Verification of the MPC-STD setup. [. . . ] Power up the MPC-STD and start ModbusTM communications with the Thomson Technology device (i. e. Refer to the MPC-STD default ModbusTM map for MEC20/TSC800 parameter addresses. THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 th Quick Installation Guide for MPC-STD Optional: Changing the ModbusTM node address of the MPC-STD: 1. The Gateway 3. 11 Utility Software provides access to the Modbus address of the MPC-STD. Install the software from the accompanying CD. :\MPC SETUP KIT 311\Setup. exe Installation Wizard will now start. Press the NEXT button to continue. THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 th Quick Installation Guide for MPC-STD Enter desired `User Name' and `Company Name', and then Press the NEXT button. Select desired `Destination Folder', then Press NEXT button. THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 th Quick Installation Guide for MPC-STD Press the NEXT button. Mark both `MPC-ETN' and `MPC-STD' with a `check mark', and then Press the NEXT button. THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 th Quick Installation Guide for MPC-STD Program is now installing onto your computer. Wait for installation to complete, then Press OK button. Gateway 3. 11 Utility Software is now Complete. 2. Ensure that the MPC-STD is powered off and then jumper pins 3 & 4 of COM2 / PLC2, (paperclip jumper will work). After one second the green OK light will start blinking steadily. Connect the COM2 end of Programming cable to the serial port on the computer. Open the required template project (MEC20 or TSC800) using the Project->Open Project menu. Select `MPC-STD' found in the `Product Selection' tree. Click the `Open Project' button found in the Tool Bar located at the bottom of the `Gateway' software window. THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 th Quick Installation Guide for MPC-STD Select S5MEC20-R1. prj for MEC20 communication or S10TSC800-R2. prj for TSC800 communication, and then Press the OPEN button. 7. Press the PLC2 button on the Gateway Utility Software toolbar. Amend the communication parameters to match the communication partner setting. Click the Advanced button to open the Modbus node edit dialog box. Enter the required Modbus Node number (the default node is 1). THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 th Quick Installation Guide for MPC-STD 8. Press the Download button of the Gateway Utility Software toolbar. Select the appropriate COM port from the combo dropdown list. The green OK should be blinking steadily. This indicates that the MPC-STD is in upload/download mode. [. . . ] Device Id: 1 NOTE: · When comm. /setup/configuration is correct the program will increment both counters (Number of Polls and Valid Slave Responses) at the same rate. You may notice that the two numbers are at a different value but both will count up at the same time. If there is any issues with comm. /setup/configuration, you may see the following messages o **Data Un-Initialized** o **Device NOT CONNECTED!** o **MODBUS Message TIME-OUT** o **MODBUS Exception Response from Slave Device** th · THOMSON TECHNOLOGY 9087A ­ 198 STREET, LANGLEY, BC CANADA V1M 3B1 TELEPHONE: (604) 888-3381 EMAIL: info@thomsontechnology. com www. thomsontechnology. com PM085 REV 1 08/08/28 [. . . ]