Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual THOMSON ROC 40. We hope that this THOMSON ROC 40 user guide will be useful to you.
Lastmanuals help download the user guide THOMSON ROC 40.
Detailed instructions for use are in the User's Guide.
[. . . ] Indicator lamp: the red indicator lamp lights up when any key is pressed. PROG +, PROG - : allows you to access the channels (received by your TV set, video recorder or satellite receiver) in either ascending (PROG +) or descending (PROG -) order. Can also be used for vertical travelling through the menus. [. . . ] The indicator lamp flashes to signal that this time is almost up, and then goes off. While the indicator is lit, enter the first digit of the 3-digit code proposed for the set to be controlled (example: 016 for THOMSON). The red indicator then goes off or flashes, if the code is not on the list. Direct the remote control towards the set and try to switch it off by pressing the key B (1). Should the set not switch off, repeat step 2. Try to switch off the set by pressing key B (1) once. Repeat this procedure by trying out each of the 3-digit codes. Check of the programming In principle, your set is ready for receiving the remote control commands. Check your remote control for proper functioning by performing the test described on page 4. Should none of the codes work, you still have the possibility of retrieving the appropriate code without having to perform any input. Hold down the key SETUP/SHIFT (20) until the red indicator lamp (12) remains lit. Direct the remote control towards the set and try to switch it off by pressing the key B (1). Should the set not switch off, press key B (1) as many times as required (up to 200 times), until the set switches off. Between two subsequent key depressions, give the red indicator lamp (12) enough time to extinguish and light up again (about 1 second). Proceeding this way will enable you to see whether the set responds or not. Check of the programming In principle, your set is ready for receiving the remote control commands. [. . . ] If you think that not all of the keys are active, try the programming Method B or C. When you have retrieved the code of your set, jot it down so that you can use it whenever needed. The THOMSON NAVILIGHT system allows you easy access to the settings of your television (TV) or video recorder (VCR) including this feature. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THOMSON ROC 40
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual THOMSON ROC 40 will begin.
