Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual THOMSON ROC1404. We hope that this THOMSON ROC1404 user guide will be useful to you.
Lastmanuals help download the user guide THOMSON ROC1404.
Detailed instructions for use are in the User's Guide.
[. . . ] The indicator lamp flashes to signal that this time is almost up, and then goes off). While the indicator is lit, enter the first digit of the 3-digit code proposed for the set to be controlled (example: 036 for Thomson). Direct the remote control towards the set and try to switch it off by pressing the key B. [. . . ] Hold down the S key until the red indicator light blinks 3 times and then remains lit. Direct the remote control towards the set and try to switch it off by pressing the key B. If the set you want to control switches off, press OK to memorise the subcode. Should the set not switch off, press key B as many times as required (up to 200 times), until the set switches off. Between pressing the keys, be sure to leave enough time for the indicator light to go out and then relight (about 1 second). Proceeding this way will enable you to see whether the set responds or not. Check of the programming: In principle, your set is ready for receiving the remote control commands. Check your remote control for proper functioning by performing the test described on page 2. Try out other remote control keys to find out the range of functions you can control. If you think that not all of the keys are active, repeat the procedure of this programming method to find out the code supporting a wider range of features. The THOMSON NAVILIGHT system allows you easy access to the settings of your television (TV) including this feature. With this method, the remote control scrolls through the full code list by sending an IR signal to the set to be controlled remotely. Hold down the S key until the red indicator light blinks 3 times and then remains lit (the indicator light remains on for a few seconds to give you the time to proceed with the following steps. The indicator lamp flashes to signal that this time is almost up, and then goes off). After a few seconds, the remote control begins to scroll through the whole code list included in the library (at a rate of roughly 1 code per second). Press the PROGp key once again to slow down the test speed (1 code every 3 seconds). [. . . ] ENGLISH - Do not mix different types of batteries or new and old batteries. In order to avoid any risk of explosion, observe polarities indicated inside the battery compartment. replace only with the type of batteries specified above. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THOMSON ROC1404
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual THOMSON ROC1404 will begin.
