User manual THOMSON ROCZ407

[. . . ] Press a BLUE up or down button to "Tilt" the camera up or down. Buttons P1 thru P4 are used to store 4 position settings for the camera. To store the first position for the camera, press the BLUE buttons to scan to the position you want. [. . . ] To store the first position for the camera, press the BLUE buttons to scan to the position you want. Move the switch at the bottom from Normal to Program. To store the second position for the camera, press the BLUE buttons to scan to the position you want. Move the switch at the bottom from Normal to Program. To store the third position for the camera, press the BLUE buttons to scan to the position you want. Move the switch at the bottom from Normal to Program. To store the fourth position for the camera, press the BLUE buttons to scan to the position you want. Refer to the owner's manual for Ninja Pan `n Tilt System for more details. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. LIMITED1-YEARWARRANTY C1 CAMERA C2 C3 C4 P1 P2 POSITION Centers the camera. . O M . K P3 Center P4 Sweep . A. C . I. G SCAN Normal Program Set to the same letter as the Transceiver and camera power supplies. [. . . ] ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. LIMITED1-YEARWARRANTY C1 CAMERA C2 C3 C4 P1 P2 POSITION Centers the camera. . O M . K P3 Center P4 Sweep . A. C . I. G SCAN Normal Program Set to the same letter as the Transceiver and camera power supplies. [. . . ]