User manual THOMSON T1000S

[. . . ] Press 3-Way to talk to both callers at the same time2. Chat HOW TO USE YOUR TELSTRA T1000S TELEPHONE FEATURES To use Call Back when a number is busy5 This feature enables you to arrange an automatic call back to a busy number. When you hear busy tone, press Call Back To cancel Call Back press Call Back Call Back Telstra T1000S Standard Rental Telephone Using Telstra Voice Assistant6 press Telstra Voice Assistanct can help you activate and de-activate Telstra Phone Features, e. g. [. . . ] Calls can be forwarded to most numbers in Australia. Applicable call costs and usage charges apply. Available to most customers who are directly billed by Telstra for access and local calls. © COPYRIGHT Telstra Corporation Limited. This document is subject to conditions prescribed under the Copyright Act. ® Registered trade mark of Telstra Corporation Limited TM Trade mark of Telstra Corporation Limited ABN 33 051 775 556. C008 8-05 1 GETTING STARTED When you unpack the telephone you will need to ensure the cords are placed in the slots provided in the base as shown in the diagram below. Connect the telephone to a line, lift the handset and check for dial tone. This ensures the telephone is powered up and will ring correctly. Repeat this step whenever the telephone has been disconnected from the line. TELEPHONE OPERATION Last Number Redial press Redial This redials the last number dialled. 5 Dialling from Memory Select and press Memory button. 2 3 45 78 6 9 An additional line socket is located at the rear to allow connection of other ACA equipment, e. g. answering machine, extension ringer or modem. Programming the 10 Memory Buttons Handset park groove is located at the top edge of the telephone. Handset hook is set in position by rotating the dial. Handset cord clamp. and select and press Memory button Note: Hang up after programming each Memory button. Use 3-Way Chat button to enter a 1. 5 second pause if required. Dial phone number Storing the Last Number Dialled into Memory press select and press Memory button 4 USING MESSAGEBANK®1 If you are a MessageBank user, it's now even easier to retrieve your messages. Your T1000S is programmed to access Telstra Home Messages 101® and MessageBank. To retrieve a message from your MessageBank TELEPHONE OPERATION Adjusting the Ringer Volume when the telephone is idle T1000S Explanatory Diagram 1. Redial button used to easily redial the last number dialled. Store button used to store numbers in one touch memories. This button is also used to adjust ringer volume. [. . . ] Bank Adjusting the Headset Earpiece Volume Setting press or Adjusts the handset earpiece volume to one of four levels. Confirmation tone will stop after min or max setting. Note: The earpiece volume will reset to normal when the handset is replaced. [. . . ]