User manual THOMSON T5173GF

[. . . ] T 5173 GF AND V 51 NB COLOUR TELEVISION with nicam digital stereo sound and fastext MAINS CONNECTION AND REMOTE BATTERIES MAINS CONNECTION The TV is suitable for use on a. c. NOTE : The mains lead of the TV is fitted with a moulded plug. If the mains sockets are not compatible or if for any reason the plug is removed please follow these directions : The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock. [. . . ] To do so : TV Press briefly. If the time display is -- -- : -- --, you cannot set the alarm. In this case, or if the time displayed is incorrect, you must first set the clock or. If the time displayed is correct, the alarm can be programmed. Press briefly. The menu shown on the right will appear. ----:---- Press briefly to select the + line. Press repeatedly to adjust the hours. Press repeatedly to adjust the minutes. ----:---- On Off Program. : 01 -- + Adjusting the alarm time automatically activates the alarm function : On is selected. On Off -- -- + + Select the Program. : 02 Choose the programme you want the set to switch on to. If you wish to cancel the alarm function, select the On line. + On On Off Off -- -- + + Select Off to deactivate the alarm function. TV Press briefly to clear the menu from the screen. Switch the television to Stand-By. The Stand-By light flashes. The television will switch on to the selected channel at the time programmed. The symbol appears on the bottom right of the screen. It will automatically switch off after five minutes if no key is pressed on the remote control or on the television keypad. If the set is switched on before the alarm function is activated, it will not switch to the programme selected for the alarm at the programmed time. It is possible to programme both the automatic switching off (SLEEP TIMER) and switching on (ALARM). In this case, the automatic switching on time must be programmed to take place after the switching off time. - 14 - MANUAL CHANNEL SETTING MENU MENU Press briefly to call up the main menu. MENU Press repeatedly to select Program. : X X Name : -- -- -- -- UK + + While the television is in any AV mode, (audiovisual), PROGRAM. menu cannot be displayed. Press briefly to display the menu. The first line is selected. PROGRAM. -- /+ This line is inactive in the UK. 1. CHANNEL SEARCH MENU If you do not know the channel numbers - + Select the line. Start the search by pressing : -- : backward channel search. + : Forward channel search. The cursor will move and the channel numbers are displayed on the CH line when received via the aerial or on the CC line for cable network. Once a station has been received, the picture appears on the screen. If the picture, corresponds to the station required, go to the line, otherwise continue the search. If you already know the channel numbers MENU Select the CH line for TV channels (aerial) or CC for cable networks. 0/AV 6 Enter the channel number (it must have 2 digits). If your VCR is connected by RF cable and if you do not find the VCR output through Autoprogramming, set channel to 38 or 60 (see User Manual of your VCR) and use fine tune up and down until the VCR output is found. [. . . ] Make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. ° ° 5 cm 10 cm 10 cm ° 10 cm 10 cm - 23 - PERITELEVISION (SCART) PIN CONNECTIONS Video inputs Composite video or sync: Pin 20 (pin 17 return). Video output Composite video: Pin 19 (pin 17 return). Audio inputs A­Pin 6 (pin 4 return). [. . . ]