User manual THOMSON T7025UD

[. . . ] T 7025 UD COLOUR TELEVISION WITH NICAM DIGITAL STEREO SOUND AND FASTEXT 10 cm 10 cm 5 cm 10 cm About this manual This document is common to several television models. Therefore, certain functions or settings may not apply to the model you have purchased About the switch The position of the ON/OFF switch differs depending on the model. It may be located on the front or on the right-hand side of your set (see the drawing inside the cover page of your manual). About safety To ensure your own safety and safe operation of the equipment, observe the following instructions thoroughly. TV sets require sufficient ventilation to prevent their components from overheating, which will cause failure. [. . . ] You may find that the characters of certain teletext languages are inaccessible for the selected country. Auto volume level : This is a sound control function which aims to equalise the volume level between different channels, and between different programmes on the same channel. Activate or deactivate the auto volume level as required. Auto volume level AV1 name AV2 name AV3 name Prog. to be used for reference time VCR ---CAMC 06 13:15 Select a station from which you want to get the reference time. Select the line marked Return to return to the previous menu. On models equipped with Dolby Surround, this function remains inactive if Dolby Virtual or Pro Logic has been selected in the SOUND menu (see Volume Control). AV1, AV2, AV3 name : Use these to give a name to each of your audio-visual programmes. Select the character you wish to modify using the Left/Right keys. or keys to display the desired Use the character. to be used for reference time : key or to use To display the time using the the alarm function, the television clock must be set to the correct time. to be used for reference time and select a channel which broadcasts teletext. The time is set automatically and is displayed after the channel number. Exit the menu using . 14 Preferences Preferences 1. Display the SUMMARY by pressing and releasing the key on the remote control . Display the menu using . Make your choice from the proposed options. Use the information below to help you. Show program. number : If you wish to permanently display the number of the programme you are watching, tick the box using the Left/Right keys. Press the Left/Right keys again to deactivate this function. PREFERENCES Return Show program. number AV2 video input AV3 video input Format control Picture preferences Video S-Video Auto AV2 video input : Use the Left/Right keys to select the type of video signal received at the AV2 SCART socket (Video or S-Video). AV3 video input : Use the Left/Right keys to select the type of video signal received at the AV3 sockets (these sockets are located on the front or the side of the television). Format control : Use the Left/Right keys to select the desired picture format: Auto : if the transmitter (for 16/9 format TV's) or the appliance connected to one of the peripheral jacks delivers the switching signal, the television automatically adapts to the transmitted picture format. 16/9 : manually selects widescreen picture format. 4/3 : manually selects this picture format. If you have selected 16/9 or 4/3, the television will switch back to Auto when you change channels or you switch off. Picture preferences : To access the PICTURE PREFERENCES menu, press . PICTURE PREFERENCES Return Settings Brightness Colour Contrast Personal If you wish, you can personalize certain picture settings. Standard corresponds to the factory settings. Personal corresponds to the settings that you have entered yourself. [. . . ] Once you have found the page, the sub-title or the news flash will be overlaid onto the TV picture. The navigation status bar disappears after a few seconds. To exit Teletext, press 21 Other Connections Other Connections The CINCH Video and Audio sockets (1)* are provided to connect a VHS or 8mm camcorder. The S and CINCH Audio sockets (1)* are provided to connect a S-VHS or Hi-8 camcorder. To use the appliance you have connected, press the key several times until the AV3 programme is selected on the screen. [. . . ]