User manual THOMSON VP4850F annexe 1

[. . . ] To disconnect it completely, it is necessary to remove the mains plug from the mains socket Under no circumstances should this appliance be put to industrial use. It is designed solely for domestic operation. Maintenance - Use a dry, clean, soft cloth. Do not use any scouring agents, solvents or abrasive products, etc. [. . . ] To proceed to the settings for your recording, always call up the information screen. Choose a channel or a AV unit connected to the audio/video sockets (AV1, AV2 or AV3). For 2-digit channels, press 0/-- first (example: 0, 1, 2 for Pr12). ENGLISH COUNTER 00H02M15S REMAIN 0H17M E180 AV1PR12 AV2 SP AV3 G 14:30 VCR VP4850F Choose the SP or LP length. LP for long play. Recording Switch to pause-record then start the recording. Record with automatic pause Press the key twice. Enter the time of the end of the current programme with the digital keys. To leave the menus, press E several times. then then COUNTER 00H02M15S PR 5 MK SP LP G 14:30 REMAIN 0H17M E180 VCR COUNTER 00H02M15S PR 5 MK SP G 14:30 REMAIN 0H17M E180 VCR COUNTER 00H02M15S REMAIN 0H17M E180 PR4 M --H--M SP G 14:30 VCR 7 PROGRAMMING a recording Display the SHOWVIEW menu. key Press the VCR e control. on your remot You can programme a recording using the ShowView codes in your TV listings magazine or using the manual programming procedure, if you do not know the codes. with ShowView codes SHOWVIEW Enter the programme code. >58624 ENTER CODE CONFIRM C 0000 ERASE EXIT E Confirm. First programme ?The first time you programme a channel, the video recorder asks you to enter the channel number (PROG-). For 2-digit channels, press 0/-- first (example: 0, 1, 2 for Pr12). 1 PROG Pr - START STOP DATE 17:30 20:00 18. 04 SP B OPTIONS E EXIT To access the programming options, press B. See also page 12 and 13. 1 PROG START STOP DATE Pr 5 17:30 20:00 18. 04 MON-FRI SP 1 2 3 4 B MON-FRI/WEEKLY STOP TIME : +10 MINS SP/LP VPS OR PDC RETURN End programming. VP4850F Switch off the video recorder to set it to recording standby. 8! With a tape loaded, on the display will confirm a successful programming. TUESD AY Y TIMES 16. 25 FUNN film Drama-come dy 58624 ShowView codes e memories. s 8 programm a o recorder haramme 8 recordings over Your vide efore prog You can ther od. The memory ART 1 PROG ST : - one year peridicated in the 1 -Pr ber is in num 2 corner top left-hand screen. of the 8 Without ShowView codes Display MAIN MENU. 1 2 3 4 5 6 7 E MAIN MENU TIMER SET UP SET CLOCK PICTURE QUALITY MESECAM on/OFF SHOWVIEW ECO. MODE ON/off EXIT Select TIMER. 1 PROG START STOP DATE PR - - - : - - - - : - - 01. 01 SP 1 2 3 E SET TIMER CANCEL TIMER NEXT TIMER EXIT Select SET TIMER. Programme the recording of a channel by entering its number (PR-) or selecting a set connected to the audio-visual sockets AV1 or AV2 if you want to trigger programming from another programmed set (satellite receiver). For 2-digit channels, press 0/-- first (example: 0, 1, 2 for Pr12). Then enter - start time, - the time the programme ends and - the date if the recording is not for the same day. To access the programming options, press B. See also page 12 and 13. 1 PROG START STOP DATE PR - - - : - - - - : - - 01. 01 SP B OPTIONS E EXIT 1 PROG START STOP DATE PR - - - : - - - - : - - 01. 01 SP B OPTIONS E EXIT 1 PROG START STOP DATE Pr 5 17:30 20:00 18. 04 MON-FRI SP 1 2 3 4 B MON-FRI/WEEKLY STOP TIME : +10 MINS SP/LP VPS OR PDC RETURN Switch off the video recorder to set it to recording standby. VP4850F ! With a tape loaded, on the display will confirm a successful programming. 9 AUDIO/VIDEO 1/2 To view and/or copy pictures from a connected AV unit. Decoder Other video recorder Satellite receiver Camcorder TV set Other video recorder Display the control screen with key EXIT/STATUS and select socket AV1 or AV2 with the AV key on the remote control. [. . . ] Connection by the aerial cable - During the automatic channel set-up, the video recorder has assigned channel number 99 to the satellite receiver connected by the aerial socket. Select this number to view the pictures of the satellite channels. Should these pictures not come up on the screen, refer to the Set-up manual, chapter "Manual channel set-up". Connection by the AUDIO/VIDEO 1 or 2 socket - If your satellite receiver is connected to the video recorder by the audio video socket, do not choose a number but select the AV1 or AV2 socket. 16 ShowView is a trademark applied for by Gemstar Development Corp. [. . . ]