User manual THOMSON VTH6020C

[. . . ] . SK . Important Précau tion s e Somma ire 1 INSTAL LATION confor - Assur me appare à celle indiqu ez-vous que il. chaleu Installez le ée sur l'étiqu la tension-sect r magné importante magnétoscop ette d'identificati eur de votre tiques habita à la chaleu ou électri(cheminée. . . e horizontalem on, située ) ou à l'arrièr tion est ques ent, r. La Celsiu e de votre tempé élevés. [. . . ] Press key C (13) or B (11) to select the country where you usually live. ð You will be informed by a message that your VCR is searching and storing the channels that can be received in your region. You'll have to wait a while until this procedure is completed, before being able to set the clock. 4 The from a or a J makesoundtelevisionTV channel stereocassette transmitted viaathe coaxial cable is monophonic. To the reproduce sound, you must use SCART cable. Set-up Clock setting 7a If date and time are correct, press EXIT (14) to leave the menus. 7b If the displayed time is incorrect or was not transmitted, set the clock with the number keys 0 to 9 (19): press key B (11), then enter time and date in the following order: hour, minute, day, month, year. 9 Quit with EXIT (14). GB Sorting the channels J The automatic channel set-up assigns the numbers to the channels in a predefined order. These numbers may therefore not match the actual channel numbers. Should this be the case, change these numbers by carrying out the instructions below. For easy channel identification, we suggest that you have a TV magazine at hand. 1 2 3 4a With key MENU (15) call up the SUMMARY menu. The Installation line is already selected, press OK (10). With key W (12) select the Channel swapping line and confirm with OK (10). If the proposed channel number matches the picture displayed, press OK (10) to switch over to the next channel. 4b Should the channel number not match the TV picture, scroll the channels with the keys C (13) or B (11). 5 When the channel number matches the TV picture, press OK (10) to validate and switch over to the next channel. 7 When all channels are sorted, press EXIT (14) to leave the menus. New or encoded channel J 1 2 3 4 5 6 7 8 9 10 11 12 13 To complete the set-up of your video recorder when the automatic channel set-up has not stored all of the channels or when you wish to store a new channel. Press key VCR (1) on your remote control. With key MENU (15) call up the SUMMARY menu. The Installation line is already selected, press OK (10). With key W (12), select the Manual set up line and confirm with OK (10). Depending on the model - The Standard line is already selected. Press C (13) or B (11) to select the reception standard: L: France, BG: Western Europe, DK: Eastern Europe. Select the Reception line with W (12) and choose CH (for the channels received via your roof aerial) or CC (for the cable network channels) with C (13) or B (11). Press W (12) to select the Autosearch line. [. . . ] With this mode activated, time is no longer displayed. Select Eco mode with key W (12). To activate the function (þ), tick off the box with key OK (10). Should the daily broadcast automatic clock-setting feature not match the official time in the area where you live: Auto clock (depending on the model) J 1 2 3 Select Auto clock with key W (12). Deactivate the function (¨) by pressing key OK (10). Set your video recorder clock manually (see page 5). Colour systems supported J Your video recorder comes with an automatic colour standard detection system (PAL / SECAM - PAL /MESECAM) that works in both play and record mode. [. . . ]