User manual THOMSON VTH6020U

[. . . ] . GB . Important Précau tion s e Somma ire 1 INSTAL LATION confor - Assur me appare à celle indiqu ez-vous que il. chaleu Installez le ée sur l'étiqu la tension-sect r magné importante magnétoscop ette d'identificati eur de votre tiques habita à la chaleu ou électri(cheminée. . . e horizontalem on, située ) ou à l'arrièr tion est ques ent, r. La Celsiu e de votre tempé élevés. [. . . ] Hold down key MENU (15) on the remote control until display shows CH - -. ð Please wait: the video recorder is searching for a channel, within the range 21 to 69, available for transmitting its pictures to the television via the coaxial cable. After a while, the video recorder display indicates the channel that will be used for this purpose. If your video recorder is connected to the television via a SCART cable, you can immediately start the Automatic channel search; otherwise, you'll first have to follow the instructions given in the following section "Settings to be made on the television". 4 J 5 6 7 Settings to be made on the television (video channel number) Take the user manual of your television and carry out the steps below. Switch on your television set. Select an available channel number (a channel which has no picture). Follow the instructions of your television user manual to find the video channel of the video recorder (the one you noted down above). ð Once the television has found the video channel of the video recorder, the following message will be displayed on the screen ( VCR, C CH 60 B ). J If the picture is poor (snowy, torn), change the communication channel of the video 8 recorder with keys C / B (11/13). Store channel and its number on the television set. J From now on, to watch the video recorder pictures or menus, you'll have to switch on the television on the channel assigned to the video recorder, i. e. the channel number chosen in step 6. 9 Continue with the steps below. Automatic channel search 1 2 Press key VCR (1) on your remote control. ð You will be informed by a message that your VCR is searching and storing the channels that can be received in your region. You'll have to wait a while until this procedure is completed, before being able to set the clock. BBC 1 on number 1, BBC 2 on number 2, so that the accurate timer recordings can be made. In very isolated cases two of these programmes may be transposed. If this happens it is simply a matter of retuning the two affected programmes. To check the automatic tuning of the channels, go to page 5. J When tuning the video recorder, it is essential that channels are stored in the correct order e. g. 4 The from a or a J makesoundtelevisionTV channel stereocassette transmitted viaathe coaxial cable is monophonic. To the reproduce sound, you must use SCART cable. Set-up Clock setting 3a If date and time are correct, press EXIT (14) to leave the menus. 3b If the displayed time is incorrect or was not transmitted, set the clock with the number keys 0 to 9 (19): press key B (11), then enter time and date in the following order: hour, minute, day, month, year. 5 Quit with EXIT (14). GB Sorting the channels J The automatic channel set-up assigns the numbers to the channels in a predefined order. These numbers may therefore not match the actual channel numbers. Should this be the case, change these numbers by carrying out the instructions below. For easy channel identification, we suggest that you have a TV magazine at hand. 1 2 3 4a With key MENU (15) call up the SUMMARY menu. The Installation line is already selected, press OK (10). With key W (12) select the Channel swapping line and confirm with OK (10). [. . . ] Display the SUMMARY menu with key MENU (15) then select HiFi controls with key W (12). With key W (12), select the sound mode line, then choose either Stereo or Mono or else, Track 1 or Track 2. Set the cursor on Level line, then adjust with key C (13) or B (11). In everyday use, these settings need not be modified. J 12 "DOLBY", "Prologic" and the double-D symbol Licensing Corporation. are trademarks of DOLBY Laboratories Use Preferences J PREFERENCES With the functions provided in the menu PREFERENCES, you may customise your control of the video recorder, automate some functions, complete your programming or modify settings. GB Eco mode Auto clock VideoPlus+ +10 Format Bo o o Auto Display the SUMMARY menu with key MENU (15), then select Preferences with key W (12). Confirm with OK (10). Eco mode J 1 2 Your video recorder can save energy thanks to its ECO feature, that decreases power consumption (down to approx. [. . . ]