User manual THOMSON VTH6050F

[. . . ] E Important Précau tion INSTAL LATION confor - Assur me appare à celle indiqu ez-vous que il. chaleu Installez le ée sur l'étiqu la tension-sect r magné importante magnétoscop ette d'identificati eur de votre tiques habita à la chaleu ou électri(cheminée. . . e horizontalem on, située ) ou à l'arrièr tion est ques ent, r. La Celsiu e de votre tempé élevés. [. . . ] ð Via the infrared window, the video recorder transmits a signal to your satellite receiver. A confirmation menu comes up while the satellite receiver positions itself on channel 12 (check whether channel 12 is indicated by the display of the satellite receiver, even if there is no image to be seen on the television screen). J The display of channel 12 by the decoder is not always effective. During the test (example: TPS), you'll have to watch your decoder's display until it briefly indicates the number 12. 9a Should the satellite receiver not use channel 12, select No with key EXIT (14). Your video recorder then starts a new search (depending on the make of your satellite receiver, several attempts are possible). J If no code works, repeat the procedure described on this page by entering the 00 into the first screen. The video recorder then tries out all the codes stored in its memory (about 150). This procedure may require a fairly long time. 9b If the satellite receiver uses the channel 12, select Yes with the OK (10) key. ð Wait for quite a long time (up to 15 minutes), until a message tells you that storage of your satellite channels is completed. ð Your video recorder now controls your satellite receiver. 12 Refer to page 5 to sort your satellite channels and check their names. J Some satellite receiver models cannot be controlled by your video recorder. In that case, you'll have to programme both sets separately for timer-controlled recording. 8 connecting the recorder to a J Whenselect the socket videoduring set-up. television set with integrated satellite receiver, you must AV1 Set-up Other sets to call up the control J Press the STATUS keyAV2, AV3 or AV4 withscreen and select the socket AV1, key AV of the remote control. Sockets AV1 / AV2 / AV3 / AV4 GB AV2 Decoder AV1 / AV2 DVD Camcorder Other video recorder AV4 Audio/Video or Dolby Pro Logic amplifier The two cinch sockets AUDIO OUT (red and white) and the cinch socket VIDEO OUT (yellow) enable you to connect your video recorder to an Audio/Video amplifier. TV set Satellite receiver Video disk player The pictures from another set operating in the play mode and connected to AV2 are conveyed to the socket AV1. When your television is connected to this socket, you can watch the pictures from the set connected. AV3 (depending on the model) Hi-Fi system The two cinch sockets AUDIO OUT (red and white) enable you to connect your video recorder to the Hi-Fi stereophonic system. Thus, you'll be able to reproduce all the sound effects of your tapes (musicals, films. . . ) on your Hi-Fi system. Camcorder Connect your camcorder to the sockets AUDIO L (left), AUDIO R (right), VIDEO and CAM/PAUSE (if your camcorder is fitted with such a socket). Select Au 3 on your video recorder. J With compatible camcorders, the PAUSE socket facilitates copying by triggering the recording mode of the video recorder as soon as the camcorder switches over from PAUSE to PLAY. The video recorder must be switched on Record Pause. "DOLBY", "Prologic" J Licensing Corporation. and the double-D symbol are trademarks of DOLBY Laboratories 9 Use Using the remote control control to operate J Your remotetelevision enables you leaving yourthe video recorder or set without seat. All you have to do is to press either key VCR for the video recorder or TV for the television. For the television set, you'll have to programme the remote control as explained below. Brand of your TV set Brand code BRANDT . . 001-000-002-010-020 Other makes: see page 21 Controlling the video recorder 1 recorder. Press key VCR to control your video 18 To switch over to another channel. 19 To select a channel. For 2-digit channels, first press 0/-(0, 1, 2 for Pr12). 3 To switch your video recorder on and off. 9 to 13 To navigate through the menus and validate with OK. 20 To mark an index. [. . . ] Unlock the video recorder with key B (3) on the remote control. Continuous play / recording J You can permanently play or record a tape. When the end of the tape is reached, it is automatically rewound until the beginning and play or recording is resumed. This function, used in combination with the LP feature, provides you with a recording of 8 hours when using an E240 tape. Continuous play: press PLAY (25) for 6 seconds. Continuous recording: press REC (29) and then PLAY (25) for 5 seconds. [. . . ]