User manual THOMSON VTH7090U

[. . . ] . GB . Important Précau tions INSTAL LATION e Somma ire 1 confor - Assur me appare à celle indiqu ez-vous que il. chaleu Installez le ée sur l'étiqu la tension-sect r magné importante magnétoscop ette d'identificati eur de votre tiques e habita à la chaleu ou électri(cheminée. . . horizontalem on, située à l'arrièr tion est ) ou ques ent, r. La Celsiu tempé élevés. [. . . ] Your video recorder now controls your satellite receiver. 13 Refer to page 5 to sort your satellite channels and check their names. If you should wish to change your satellite receiver, select the Installation line from the SUMMARY menu then the Satellite and cable line and finally the New installation line. If you should wish to rearrange your satellite receiver channels, select the Satellite channel identification line from the SATELLITE AND CABLE menu. connecting the recorder to a Whenselect the socket videoduring set-up. television set with integrated satellite receiver, you must AV1 7 Installation Other sets Press the status key (4) to call up the control screen and select the socket AV1, AV2, AV3 or AV4 with key AV (22) of the remote control. Sockets AV1 / AV2 / AV3 / AV4 AV1 - AV2 AV2 Decoder AV1 / AV2 / AV4 DVD Other video recorder AV4 Camcorder Audio/Video or Dolby Pro Logic amplifier The four cinch sockets AUDIO IN/OUT (red and white) and the two VIDEO IN/OUT cinch sockets (yellow) enable you to connect your video recorder to an Audio/Video amplifier. TV set Satellite receiver Video disk player The pictures from another set operating in the play mode and connected to AV2 are conveyed to the socket AV1. When your television is connected to this socket, you can watch the pictures from the set connected. AV3 Hi-Fi system Camcorder Connect your camcorder to the sockets AUDIO L (left), AUDIO R (right), VIDEO IN and CAM/PAUSE and select socket AV3 on your video recorder. The four cinch sockets AUDIO IN/OUT (red and white) enable you to connect your video recorder to the HiFi stereophonic system. Thus, you will be able to reproduce all the sound effects of your tapes (musicals, films. . . ) on your HiFi system. With compatible camcorders, the PAUSE socket facilitates copying by triggering the recording mode of the video recorder as soon as the camcorder switches over from PAUSE to PLAY. The video recorder must be switched on Record Pause. 8 "Prologic" "DOLBY", Corporation. and the double-D symbol Licensing are trademarks of DOLBY Laboratories Use The remote control to Your remote control enables you setboth control the video recorder and the television depending on the vcr/dvd/tv button position. There is a risk that the remote control may not be compatible with the television set depending on the model or also that some functions may not be available. Brand of your TV set: Brand code BRANDT . . 001-000-002-010-020 Other makes see page 26 Controlling the video recorder Remember to set the button to vcr before trying to use the video recorder remote control. 14 To start immediate recording of what you are 1 To switch the video recorder on and off. 15 To double the recording time of the video 2 To select the VPS/PDC function. 3 To call up the VIDEO Plus+ menu. GB 4 5 6 To call up the information screen. To call up the sub-titles. 17 To add an index. 21 channels, first press 0/--. To choose a channel. For two-digit 7 to 10 To navigate through the menus. 13 To call up the SUMMARY menu. 22 To select sets connected to the Audio/Video sockets. 23 Rewind 26 Record 24 Play 27 Stop 25 Fast forward 28 Pause/Still image Programming the remote control with the TV, other video recorder or a THOMSON DVD code. 1 2 Your remote control may also be used to control various other televisions, video recorders, and THOMSON DVD players. In order to be able to do this, you must programme the remote control with one of the codes provided above or on page 26. Set vcr/dvd/tv button to tv, vcrb or dvd, depending on the appliance you wish to control. [. . . ] to lock the Electronic lock 1 Hold down the standby key B (3) on the remote control for 10 seconds and put it in a safe place. 2 Press the standby key B (3) on the remote control to unlock the video recorder. To prevent the video recorder from being used, keys on the front can be locked. GB Continuous play/recording You can select endless playback or recording of a tape. When the end of the tape is reached, it is automatically rewound until the beginning and play or recording is resumed. This function, used in combination with the LP feature, provides you with a recording of 8 hours when using an E240 tape. Continuous play: press PLAY (24) for 6 seconds. [. . . ]