User manual THOMSON WFT8142I

[. . . ] Taste OptionsauswahlZeitvor- taste wahl Taste Taste OptionsauswahlSchleudern Zeitvor- taste wahl Dear Costumer, You have just acquired a THOMSON washing machine and we would like to thank you. We have invested all our dedication and know-how in this appliance so that it would best meet your needs. With innovation and performance, we designed it to be always easy to use. In the THOMSON product range, you will also find a wide choise of ovens, microwaves, cooking hobs, ventilation hoods, dishwashers, driers, fridges and freezers, that you can coordinate with your new THOMSON washing machine. [. . . ] We therefore recommend you follow the detergent manufacturer's instructions. B Select the desired wash programme by turning the programme selector dial (see programme table). When you select a programme, the following information will appear on the display: 1 Wash programme phases: - display models Prewash Wash Rinse Spin-dry - non-display models Wash Rinse End 2 Spin speed 3 Programme nº (for a few seconds) and then programme duration (display models only). 9 Wool 11 Delicate 13 Synthetic 10 Hand cold 30ºC wash 12 Delicate 14 Synthetic 30ºC 40ºC 15 Synthetic 60ºC 16 ExcelA 45' We recommend choosing the most suitable programme and avoiding using the prewash whenever possible. This will save you money and help to preserve the environment. For wash programmes and consumption in accordance with Standard EN60456, press the intensive wash button. Load of clothes (kg) Normal wash, rinses, fabric softener added automatically if used and long final spin Prewash, normal wash, rinses, fabric softener added automatically if used and long final spin 8 Normal wash, rinses, fabric softener added automatically if used and long final spin 8 Delicate wash, rinses, fabric softener added automatically if used and gentle final spin SHORT wash, rinse, fabric softener added automatically if used and long final spin _ Draining and long final spin 2 WOOLLENS wash, rinses, fabric softener added automatically if used and gentle final spin 0, 10/37 Delicate wash, rinses, fabric softener added automatically if used and gentle final spin 4 Synthetics wash, rinses, fabric softener added automatically if used and gentle final spin 4 Normal wash, rinses, fabric softener added automatically if used and gentle final spin NOTE: Consumptions in kWh and litres and programme duration may vary depending on the type and amount of clothes loaded, water pressure, etc. The wash options must always be selected after choosing the wash programme. Any programme change during selection cancels the previously selected options. Spin speed selection The programme selected is associated with certain spin revolutions, as shown on the display. It can be modified by pressing the spin button and the number of revolutions will be reduced by 100 revolutions at a time to 400. No spin Press the spin button again to get to the no spin option. It is used to prevent creasing when washing special fabrics. Full tub stop option The wash programme stops on the last rinse, with the clothes left in water. When the function is deactivated, the washing machine continues the programme, draining and spin-drying. It is used, for example, when you are not at home and want to delay the spindrying until you get home, to prevent the clothes creasing after spin-drying and being left in the drum to be removed. The delay must be selected after choosing the wash programme. On non-display models, you can choose a delay of either 3, 6 or 9 hours. cancelling the delay To cancel the delay you have to press the clock button successively. The delay will be cancelled when 24 hours have been reached and the button is pressed once more. Additional function selection button depending on programmes There are either 3 options or 2 options, depending on the model: easy ironing, extra rinse and intensive. press the select button to display the option required. [. . . ] The reasons for the F02 indicator may be the following: washing machine drain pump blocked, building drainage pipes blocked, or incorrect pump electrical connection. When it does not spin-dry, C03 appears on the display. This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations. Why can't I see any water in the drum during the wash? [. . . ]