User manual THOMSON WTT6130I

[. . . ] As part of our commitment to constantly improving our products, we reserve the right to make changes to them based on technical advances to their technical and functional features and appearance. Before installing and using your appliance, please carefully read this Guide to Installation and Use, which will allow you to quickly familiarise yourself with its operation. You have just acquired a THOMSON washing machine and we would like to thank you. With the help of all the experience we have gained over the years, we have designed this machine in order to make your life easier by offering you performance, ease of use and quality. [. . . ] -- Washing : Never exceed the indicated temperatures -- Use of cold diluted bleach possible: cl -- Iron: Low Medium High -- Dry clean: mineral spirit perchlorethylene all solvents -- NB: A crossed-out code indicates that it is forbidden All the buttons are on microswitches and do not remain depressed. In any case, the "Start/Pause" button cannot cancel a programme. Before starting your machine, check that the power cable is plugged in and the water tap is open. also ensure that the drum doors are closed correctly and the machine's lid is shut. During the "End of Cycle" phase, any action on one of the controls (the selectors or the buttons) returns you to "Programming" mode. As a safety measure, when the cycle is over, we recommend that you unplug the power cable and turn off the water tap. NB: Turning the selector to any position other than "OFF" provides power to the machine. They may vary according to the wash load, the temperature, etc. -- If you programme a "Prewash", you must add 18 to 25 minutes. -- If you programme "Extra rinse", you must add 17 minutes. If your washing comprises SILK or PARTICULARLY DELICATE FABRICS NB : A programme with a very gentle mechanical action and no intermediate spins between rinses. The cycle ends with a very gentle, progressive spin restricted to 600 rpm. If your washing comprises hard-wearing white COTTONS or LIGHT COLOURS. When washing coloureds do not exceed a maximum temperature of 60°C. NB : During the first few minutes of the programme, your machine automatically evaluates the washing load you have introduced and adapts the water consumption and the length of the programme accordingly to provide a perfect wash This programme enables you to refresh a small load of 2. 5 kg of lightly soiled washing composed of WHITES , COTTONS , COLOUREDS or HARD-WEARING SYNTHETICS. The cycle time is restricted to around 30 minutes In this programme, the washing temperature is automatically programmed at 40°C. NB : A programme with agitation and spin phases specially adapted to these types of fabrics. For this programme, the doses of detergent should be reduced by half. A separate rinse followed by a choice of: -- Either spin and drain -- Or drain only ("Drip-dry" option) -- Or a stop with the drum full of water. This 40°C programme enables you to wash a usual 3kg load of cottons and mixed textiles in 45 minutes while ensuring perfect washing results and maximum energy savings. In the case of "Rinse only" followed by a spin or "Spin only", ensure that you select a suitable spin speed for the type of washing in the machine. [. . . ] Check that the water tap is open and then press the "Start/Pause" button again to restart the cycle. This incident may also be caused by the drain hose being poorly connected (see the section "DRAINING AWAY THE WASTE WATER"). Clean the pump filter (for how to do this, see the section "CLEANING THE PUMP FILTER") and then press the "Start/Pause" button again to restart the cycle. Check that the lid is closed and then press the "Start/Pause" button again to restart the cycle. [. . . ]