User manual THRUSTMASTER ENZO FERRARI FORCE GT

[. . . ] ) 2/6 SELECTING A SWITCH POSITION Switch in “USB” position This position should be selected for games which do not require you to connect a gamepad in addition to the USB wheel. However, in order to avoid having to repeatedly connect/disconnect the GAMEPORT connector, we recommend that you simply connect it to your console as well as your wheel’s USB connector. Most recent games will use this position. Switch in “USB + GAMEPORT” position This position should be selected for games which require you to connect a gamepad in addition to the USB wheel (the gamepad allows you to access the setup options and have the game recognize your Force Feedback wheel). [. . . ] The Mode LED (8) flashes green for 2 seconds when you return to “Normal” mode. Normal Sequential Gearbox Inverted Sequential Gearbox Please refer to the Settings chart provided in the appendix to find the type of sequential gearbox that corresponds to your racing game. Precision Drive mode Precision Drive mode has been specially developed with a view to enhancing performance. Depending on the game, it may help you to beat your best times (and those of your opponents) or make it easier to successfully complete the different driving events. This new exclusive mode calculates and redistributes your Enzo wheel’s various analogy points without generating any dead zones (as may be the case with other wheels which allow you to adjust their sensitivity). How appropriate and effective this mode will be depends on the game you are playing and the course you are racing on. In this mode, the wheel is more sensitive and will allow you to powerslide more easily and thus avoid an excessive loss of speed, in courses with hairpin turns for example. In games where the wheel’s reactions are very sensitive (such as F1 racing, for example), you will therefore probably want to avoid using this mode. We recommend that you use this mode with an interior view for maximum effectiveness. 4/6 Please refer to the Settings chart provided in the appendix to find out whether this mode is recommended for your game. To switch to Precision Drive mode, press the D-pad (4) and the Mode button (7) simultaneously. TROUBLESHOOTING - My wheel doesn’t work in the game: Change the position of the USB / USB + GAMEPORT switch (9) and then restart your console with the switch in the new position. - My wheel doesn’t seem to be calibrated properly: Please consult the section in your game’s manual regarding settings for details on how to configure your wheel in the game. - My wheel moves on its own: This is normal. The auto-recentering function starts up each time you switch on the console and/or let go of the wheel in an uncentered position. Recentering is characterized by back-and-forth movements (left-right-left…) which do not affect playability. To stop these movements, simply place your hands on the wheel. If you will be taking an extended break, unplug the wheel’s power adapter. Plug it back in again before returning to your game. - My wheel stays turned to one side (left or right) after auto-calibration: This is normal in some games. The wheel will recenter itself once you have identified it as a wheel in the game’s setup options. If the problem persists, disconnect your wheel and repeat the installation. [. . . ] This product is not sponsored, endorsed or approved by Sony. negcon™ is a trademark of Namco Ltd. All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. [. . . ]