User manual THRUSTMASTER F1 WIRELESS GAMEPAD FERRARI F60

[. . . ] To wake up your gamepad: press START or use the POWER ON/OFF switch (14). Set your receiver’s USB selector to the “PS3” position. Connect the USB connector to USB port #1 on the console. Switch on your gamepad using the POWER ON/OFF switch (14). [. . . ] PRESET button color Lit up green Lit up red Flashes red Raise or lower the direction on the optical wheel Lit up green or press the trigger onto which you wish to place your function. Your “MANUAL PRESET” is now enabled and up to date (with your programming applied to the optical wheel or triggers) SWITCHING BUTTONS/MINI-STICKS/D-PAD All buttons, as well as directions of the mini-sticks and of the D-Pad can be switched using the MAPPING button (7). Examples of possible applications: - Switch buttons between themselves - Switch the 2 mini-sticks (in this case, you will to have to map the 4 directions of the first mini-stick to the 4 directions of the second mini-stick) - Switch the D-Pad with a mini-stick (in this case, you will have to map the 4 D-Pad directions to the 4 directions of the mini-stick in question). Procedure for switching buttons, mini-sticks and D-Pad - Does not work for the triggers. - Works for the optical wheel but only on PC and in “7 axes” mode. PRESET button color Lit up green Lit up red Flashes red Press and release the button or direction onto which you wish to Lit up green place your function. Your “MANUAL PRESET” is now enabled and up to date (with the 2 functions switched). 7/12 EEPROM MEMORY Your gamepad features an internal chip which saves all of your “MANUAL PRESET” programming (even when the gamepad is switched off or disconnected for a long period of time). You can save a different “MANUAL PRESET” for each platform used: PlayStation® 3, PC 4 Axes and PC 7 Axes TO ERASE YOUR “MANUAL PRESET” PRESET button color 1 Enable your “MANUAL PRESET” (8). Lit up green Flashes green 2 2 Press and hold the MAPPING button (7) for 2 seconds. Seconds Your “MANUAL PRESET” is now clear (and once again identical to the “AUTOMATIC PRESET”). Action RETURNING TO “FACTORY SETTINGS” You can erase all of your programming or settings: Steps Action MAPPING button color Press the MAPPING + SELECT + START buttons 1 Flashes blue 5 seconds simultaneously All of your “MANUAL PRESETS” (= PC + PS3) or settings are now clear. Note: this procedure will completely restart your gamepad (on PC, we therefore recommend that you do this outside of games). POSSIBLE USES IN GAMES The optical wheel (thanks to its technology and degree of rotation greater than that of any mini-stick) offers unparalleled precision and stability in all types of games: racing (ultra-precise steering), flying (rudder), action and FPS (progressive zoom), sports (measured shot, strength of hit), etc. The triggers (thanks to their progressive action and range of mechanical travel greater than that of any button) offer extremely precise control in all types of games: racing (progressive and independent acceleration and braking, handbrake), action and FPS (rate of fire, lateral movement), sports (measured pass or shot, strength of hit or jump, running speed), etc. SOME EXAMPLES AND TIPS: - There are numerous configuration possibilities, depending on the game you are playing. - In certain games (racing type), do not hesitate to test out the 2 sensitivity modes for your optical wheel (Normal or High) in order to optimize its precision and responsiveness. 8/12 DIFFERENT EXAMPLES ACCORDING TO TYPE OF GAME Action/Adventure (“Car” mode) Action/Adventure (“On foot” mode) Sports (“Ball game” type) Sports (“Golf” type) Car racing (“Simulation” type) Car racing (“Arcade/Rally” type) Flying (“Simulation” type) Flying (“Arcade/Action” type) 9/12 USING MORE THAN ONE “Ferrari Wireless” GAMEPAD AT THE SAME TIME (in Multiplayer mode) You can use up to 4 “Ferrari Wireless” gamepads at the same time (in multiplayer mode). Channel detection is carried out automatically In case of error or to force the connection: press the CONNECT button on the receiver and simultaneously press the L2 + R2 + MAPPING buttons on your gamepad. TROUBLESHOOTING AND WARNINGS My gamepad doesn’t function correctly or seems improperly calibrated: - In the event of malfunction due to electrostatic emission, exit the game, switch off your gamepad and disconnect the receiver from your console or your PC. To play again, reconnect the receiver, switch your gamepad back on and start the game again. - Never move the mini-sticks, the optical wheel or the triggers when connecting your gamepad (to avoid any calibration problems). [. . . ] All other trademarks and brand names are hereby acknowledged and are the property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. ENVIRONMENTAL PROTECTION RECOMMENDATION At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is confirmed by the symbol found on the product, user manual or packaging. [. . . ]