User manual THRUSTMASTER NOMAD PACK WIRELESS 2

[. . . ] Insert the 2 AAA batteries provided into the compartment, making sure to respect the polarity indicated. A red LED lights up on the underside of the mini-mouse. If necessary, disconnect the mouse already connected to your computer. Connect the transmitter/receiver to one of your computer’s USB ports. [. . . ] Once charging is complete, you may disconnect the recharging cable and use the wireless mini-mouse at a distance from your computer. cONNECTING THE NUMERIC KEYPAD AND EARPHONES 1. Connect the numeric keypad’s USB connector to one of your laptop’s USB ports. A green LED lights up on the numeric keypad; the keypad is locked numerically by default. Your numeric keypad features two USB ports which you can use to connect USB peripherals such as a printer, digital camera, webcam, external audio module, etc. As the numeric keypad is not powered by an external power source, it may happen that the keypad will not accept certain USB peripherals which require a great deal of power, such as some vibrating game controllers for example (gamepad or racing wheel) or even some printers. If you have Windows 98 SE installed on your computer, you must also install the USB drivers for the numeric keypad: - Click on Next in the dialog box that appears. - If prompted by Windows to do so, insert the Windows 98 SE CD-ROM into your computer’s CD-ROM drive in order to install the required system files. - Follow the on-screen instructions to complete the installation. Connect the earphones’ connector to the headphone plug on your computer. Give the retractable earphone cable a sharp little tug to release it or lock it in place at the length you require. tROUBLESHOOTING 1) The mini-mouse does not switch on. The mini-mouse switches on but does not work. - Make sure that you have inserted the batteries correctly, in accordance with the polarity indicated on the inside of the battery compartment. - Make sure that you have closed the battery compartment cover properly. If necessary, disconnect and then reconnect all cables. Verify in particular that you have connected the longer connector on the recharging cable to the port on the mini-mouse. - Establish communication between the mini-mouse and the transmitter/receiver: press the + button on the transmitter/receiver and then the ID Connect button on the back of the mini-mouse. - Under Windows 98 SE: make sure that you have properly installed the USB drivers required for your mini-mouse to function. - Make sure that your laptop computer’s USB port is working properly, for example by reconnecting your old mouse or another USB peripheral. If necessary, disconnect and then reconnect all cables. - Establish communication between the mini-mouse and the transmitter/receiver: press the + button on the transmitter/receiver and then the ID Connect button on the back of the mini-mouse. [. . . ] Some States/Provinces do not allow limitation on how long an implied warranty lasts or exclusion or limitation of incidental/consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other legal rights which vary from State to State or Province to Province. ENVIRONMENTAL PROTECTION RECOMMENDATION At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is confirmed by the symbol found on the product, user manual or packaging. [. . . ]