User manual THRUSTMASTER T-WIRELESS 3-IN-1 RUMBLE FORCE

[. . . ] Connect the receiver’s PS2 Gameport connector (9) to port number 1 on your console. Switch on your gamepad using the POWER ON switch (13). ATTENTION: NEVER CONNECT THE USB CABLE (10) TO YOUR PLAYSTATION® 2 (to avoid the risk of damaging your gamepad or your console) 2/6 PLAYSTATION® 3 INSTALLATION ON PLAYSTATION® 3 1. Connect the receiver’s USB connector (10) to USB port number 1 on your console. [. . . ] € Programming/switching procedure: Steps 1 2 3 Action Press and release the MAPPING button (6) Press and release the button or direction to switch Press and release the button or direction where you wish to place the function The two functions are now switched. € To return to “default” programming (to erase all of your programming): Steps 1 2 Action Press and hold the MAPPING button (6) for 2 seconds Release the MAPPING button (6) Your programming is now erased. LED (11) (on gamepad) FLASHES SLOWLY ON LED (11) (on gamepad) FLASHES SLOWLY FLASHES QUICKLY ON Please note that your programming also disappears each time the gamepad is disconnected, or when the gamepad or console restarts. USING MORE THAN ONE T-WIRELESS GAMEPAD AT THE SAME TIME (In multiplayer mode) You can use up to 4 T-Wireless gamepads at the same time (in multiplayer mode). To do so, channel detection must absolutely be carried out manually, as described below. € Procedure: - For 2 seconds, simultaneously press and hold the 2 CONNECT buttons on the gamepad and the receiver you wish to use (8 and 12). - Repeat this procedure for other players. Once a connection has been established, the LEDs stop flashing and stay lit. 4/6 TROUBLESHOOTING AND WARNINGS • My gamepad doesn’t function properly or doesn’t seem to be properly calibrated: - In the event of malfunction during use due to electrostatic emission, please exit the game, switch off your gamepad and unplug the receiver from your console or PC. Resume normal game play by plugging the receiver back in, then switch on the gamepad and launch the game again. - Never move the mini-sticks when connecting your gamepad (to avoid any calibration problems). € I can’t configure my gamepad: - In your game’s “Options/Controller/Gamepad” menu: select the most appropriate configuration. - Please refer to you game’s user manual or online help for more information. - You can also use your gamepad’s “programming” function to resolve this type of problem. € On PC, the vibrations don’t stop: - Decrease the intensity of force effects in your game’s controller options or adjust the forces in the gamepad’s control panel. When you’re done using your gamepad, we recommend that you always set your gamepad’s POWER switch (13) to the OFF position (to extend battery life). TECHNICAL SUPPORT If you encounter a problem with your product, please go to http://ts. From there you will be able to access various utilities (Frequently Asked Questions (FAQ), the latest versions of drivers and software) that may help to resolve your problem. If the problem persists, you can contact the Thrustmaster products technical support service (“Technical Support”): By email: In order to take advantage of technical support by email, you must first register online. The information you provide will help the agents to resolve your problem more quickly. Click Registration on the left-hand side of the Technical Support page and follow the on-screen instructions. If you have already registered, fill in the Username and Password fields and then click Login. [. . . ] pentium® is a registered trademark of Intel Corporation. All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. ENVIRONMENTAL PROTECTION RECOMMENDATION At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. [. . . ]